Download
Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE
MODEL or KEYWORD

DMM6500 6½-Digit Graphical Touchscreen Digital Multimeter

A touchscreen bench/production test DMM with more measurement capability - including transient capture, data visualization, and analysis – at the price of other 6½-digit DMMs with far less performance. See all digital multimeters »

 

Base Price
US $1,160
Buy/Quote Questions? Chat Now
Measurement Functions

Up to 15

Sensitivity

100 nV
10 pA
1 µOhm

Digitizer

1M sample/s
16 bits

A wider range of measurements

Get 15 built-in measurement functions, including digitizing, capacitance, and temperature. Make low current and low resistance measurements on low-power devices. Capture transient signals with the built-in digitizer. See two measurements simultaneously to maximize test data. The DMM6500 eliminates the need for additional instruments.

Visualize data and identify measurement trends with the ease of a touchscreen

Get instant measurement insight, such as capturing transient signals and seeing data trends and statistics right on the touchscreen, so you can analyze your data faster and eliminate making additional measurements.

Highlights

  • Display plots of waveforms including overlays of one waveform over another.
  • Pinch and zoom features allow studying transients and signal waveshapes.
  • User cursors and computer statistics to characterize waveforms.

Expand to ten measurement channels

If you need to look at more devices simultaneously or make multi-point measurements on a device, you can select an optional scan card that gives you up to 10 measurement channels without needing to buy more instruments.

Greater production test throughput and lower cost of test

Highlights

  • Make measurements as short as 0.0005 power line cycles or 8.3 µs (10 µs) for 60 Hz (50 Hz) power lines.
  • Use on-instrument, intelligent, command and control processing to reduce PC communication for reduced test time.

Get an extensive set of interface options

Standard LAN LXI and USB plus optional GPIB, RS-232, and TSP-Link® interfaces

No need to write new code while upgrading

Get code emulation for popular Keithley and competitive DMMs allowing you quick and easy code conversion and faster upgrade.

Model Measurement Functions Sensitivity Digitizer List Price
DMM6500

15

100 nV
10 pA
1 µOhm

1 M sample/s
16 bits

US $1,160
Configure & Quote
Model Measurement Functions Sensitivity Digitizer List Price
DMM6500

15

100 nV
10 pA
1 µOhm

1 M sample/s
16 bits

US $1,160
Configure & Quote

Capture and analyze complex waveforms and transient signals

The DMM6500 can do more than just provide readings on the display. It can also plot a waveform captured with its digitizer. Using the touchscreen, sections of the waveform can be expanded using pinch and zoom functionality. In addition, cursors and statistics provide further detail on the characteristics of the signal. Capture waveforms and transients with:

  • 1Msample/s, 16-bit digitizer.
  • Pinch and zoom manipulation of a signal.
  • Statistics, such as average, maximum value, minimum value, and standard deviation on signal segments defined by horizontal and vertical cursors.

Expand test capacity by measuring up to 10 devices in a single test setup

Add an optional multiplexer card to the DMM6500 and measure at multiple points on a single device or make measurements on up to 10 devices. Use the multiplexer cards to expand system capacity or take time-saving measurements on one device.

Highlights

  • Measure up to 10 channels of voltage or 2-wire resistance or up to 5 channels of 4-wire resistance with the optional 2000-SCAN card.
  • Measure up to 9 channels of temperature with thermocouples using the optional 2001-TCSCAN multiplexer card. The card has an internal cold junction compensation reference sensor.

Measure cable and connector resistance with high sensitivity and excellent accuracy

Measurement of low resistance requires good techniques to eliminate thermal errors and test lead resistance. With the DMM6500 you can:

  • Measure with 1 µΩ sensitivity.
  • Use the 4-wire resistance measurement function to eliminate test lead error.
  • Use offset compensation to eliminate thermal contact error.

Maximize throughput in manufacturing test

Reduce test time with faster measurements. Also test up to 10 devices in one test setup. Further minimize communication with the PC using the built-in intelligence of the DMM6500. The DMM6500 can control other instruments in a test system.

Highlights

  • Make measurements as short as 0.0005 power line cycles or 8.3 µs (10 µs) for 60 Hz (50 Hz) power lines.
  • Use Keithley’s internal-instrument, Test Script Processor (TSP®) to execute a test and to control other TSP- or LAN-based instruments.
  • Use the optional 10-channel scanner card or the optional 9-channel temperature scanner card to test more devices with one test setup.

 

Datasheet 1751.
Datasheet Accessory
SAFETY TEST LEADS
Datasheet 1754
Datasheet Accessory
SAFETY UNIVERSAL TEST LEAD KIT
Datasheet 1757
Datasheet Accessory
Description Datasheet Pair, general purpose test lead set, 1000V CATll
Datasheet 2000-SCAN
Datasheet Accessory
SCANNER BOARD
Datasheet 2001-TCSCAN
Datasheet Accessory
THERMCPL/GEN PURPOSE SCAN CARD
Datasheet 2450-TLINK
Datasheet Accessory
DB9 TO TRIGGER LINK CONNECTOR ADAPTER
Datasheet 4299-10
Datasheet Accessory
DUAL FIXED RACK-MOUNT KIT FOR ONE 2U GRAPHICAL DISPLAY INSTRUMENT AND ONE SERIES 26XX INSTRUMENT
Datasheet 4299-11
Datasheet Accessory
DUAL FIXED RACK-MOUNT KIT FOR ONE 2U GRAPHICAL DISPLAY INSTRUMENT AND ONE SERIES 24XX, SERIES 2000, or 2U AGILENT INSTRUMENT
Datasheet 4299-8
Datasheet Accessory
SINGLE FIXED RACK-MOUNT KIT FOR 2U GRAPHICAL DISPLAY INSTRUMENTS
Datasheet 4299-9
Datasheet Accessory
DUAL FIXED RACK-MOUNT KIT FOR 2U GRAPHICAL DISPLAY INSTRUMENTS
Datasheet 5804
Datasheet Accessory
4 TERMINAL TEST LEAD SET
Datasheet 5805
Datasheet Accessory
KELVIN PROBES, 0.9M (3FT)
Datasheet 5806
Datasheet Accessory
KELVIN CLIP LEADS
Datasheet 5808
Datasheet Accessory
LOW COST SINGLE PIN KELVIN PROBE SET
Datasheet 7007-1
Datasheet Accessory
SHIELDED GPIB CABLE,1M (3.2FT)
Datasheet 7007-2
Datasheet Accessory
SHIELDED GPIB CABLE,2M (6.5FT)
Datasheet 8501-1
Datasheet Accessory
TRIGGER LINK CABLES W/DIN CON
Datasheet 8501-2
Datasheet Accessory
TRIGGER LINK CABLE
Datasheet 8503.
Datasheet Accessory
8-Pin DIN-TO-BNC TRIGGER CABLE
Datasheet 8606
Datasheet Accessory
MODULAR PROBE KIT
Datasheet 8610
Datasheet Accessory
LOW THERMAL SHORTING PLUG
Datasheet KPCI-488LPA
Datasheet Accessory
LOW PROFILE IEEE-488 INTERFACE BOARD
Datasheet KTTI-GPIB
Datasheet Accessory
Description Datasheet GPIB Communication and Digital I/O accessory, user-installable
Datasheet KTTI-RS232
Datasheet Accessory
Description Datasheet RS232 Communication and Digital I/O accessory, user-installable
Datasheet KTTI-TSP
Datasheet Accessory
Description Datasheet TSP-Link Communication and Digital I/O accessory, user-installable
Datasheet KUSB-488B
Datasheet Accessory
IEEE-488.2 USB-TO-GPIB INTERFACE ADAPTER
Datasheet USB-B-1
Datasheet Accessory
USB CABLE TYPE A TO B, 1M
Datasheet Datasheet Accessory
Description Datasheet 1751. SAFETY TEST LEADS
Description Datasheet 1754 SAFETY UNIVERSAL TEST LEAD KIT
1757 Pair, general purpose test lead set, 1000V CATll
Description Datasheet 2000-SCAN SCANNER BOARD
Description Datasheet 2001-TCSCAN THERMCPL/GEN PURPOSE SCAN CARD
Description Datasheet 2450-TLINK DB9 TO TRIGGER LINK CONNECTOR ADAPTER
Description Datasheet 4299-10 DUAL FIXED RACK-MOUNT KIT FOR ONE 2U GRAPHICAL DISPLAY INSTRUMENT AND ONE SERIES 26XX INSTRUMENT
Description Datasheet 4299-11 DUAL FIXED RACK-MOUNT KIT FOR ONE 2U GRAPHICAL DISPLAY INSTRUMENT AND ONE SERIES 24XX, SERIES 2000, or 2U AGILENT INSTRUMENT
Description Datasheet 4299-8 SINGLE FIXED RACK-MOUNT KIT FOR 2U GRAPHICAL DISPLAY INSTRUMENTS
Description Datasheet 4299-9 DUAL FIXED RACK-MOUNT KIT FOR 2U GRAPHICAL DISPLAY INSTRUMENTS
Description Datasheet 5804 4 TERMINAL TEST LEAD SET
Description Datasheet 5805 KELVIN PROBES, 0.9M (3FT)
Description Datasheet 5806 KELVIN CLIP LEADS
Description Datasheet 5808 LOW COST SINGLE PIN KELVIN PROBE SET
Description Datasheet 7007-1 SHIELDED GPIB CABLE,1M (3.2FT)
Description Datasheet 7007-2 SHIELDED GPIB CABLE,2M (6.5FT)
Description Datasheet 8501-1 TRIGGER LINK CABLES W/DIN CON
Description Datasheet 8501-2 TRIGGER LINK CABLE
Description Datasheet 8503. 8-Pin DIN-TO-BNC TRIGGER CABLE
Description Datasheet 8606 MODULAR PROBE KIT
Description Datasheet 8610 LOW THERMAL SHORTING PLUG
Description Datasheet KPCI-488LPA LOW PROFILE IEEE-488 INTERFACE BOARD
KTTI-GPIB GPIB Communication and Digital I/O accessory, user-installable
KTTI-RS232 RS232 Communication and Digital I/O accessory, user-installable
KTTI-TSP TSP-Link Communication and Digital I/O accessory, user-installable
Description Datasheet KUSB-488B IEEE-488.2 USB-TO-GPIB INTERFACE ADAPTER
Description Datasheet USB-B-1 USB CABLE TYPE A TO B, 1M
Understand the power profile details of your wireless device designs by performing a digitized current capture with the DMM6500 6.5-digit Graphical Sampling Multimeter. This example places a …
In this video, we will demonstrate how to use two DAQ6510 units in tandem to increase the total available DC Voltage scan channels via Digital I/O. Using the instrument's front panel, both units …
In this video, we will demonstrate the time it takes to initiate a basic scan using the Keithley DAQ6510 Data Acquisition and Multimeter Unit in comparison to the Keysight 34972A Data Acquisition …
1m 10s
This video provides an overview of implementing corrective measures when making low resistance measurement using the Keithley DMM6500 6.5 Digit Multimeter. We review the following: Typical …
This video introduces Apps on the DAQ6510 and DMM6500. Two apps that are available on the instruments by default are the Channel Grid and Relay Count apps. The Channel Grid app allows for enhanced …
Keithley’s new DMM6500 is an exciting new entry to the world of 6-½ digit multimeters. In this video, we will go over a comparison between the DMM6500 and the Keysight 34461A. The measurement …
This video introduces the capacitance function on the DMM7510, DMM6500, and DAQ6510. The function is described briefly and then a demonstration measurement is made, including using the built-in …
1m 34s
Make extremely accurate power rail measurements using two Tektronix power rail probes, a Keithley DMM6500 touchscreen Digital Multimeter, and ultra-low-noise 6 Series mixed signal oscilloscope …
0h 1m 46s
Do you have trouble making accurate current or voltage measurements? Are you able to make repeatable single ended, differential, and common mode measurements? Start making reliable power …
1m 25s
In this video, we will demonstrate how to use two DAQ6510 units in tandem to increase the total available DC Voltage scan channels via External Triggering. Using the instrument's front panel, both …
Keithley’s new DMM6500 is an exciting new entry to the world of 6-½ digital multimeters. In this video, we will go over a comparison between the DMM6500 and the Keysight 34401A (or the Agilent …
Explore a collection of test and measurement tools chosen by Tektronix experts perfect for engineers working on power integrity. From measuring ripple on DC power rails to seeing noise on your …
1m 26s
KickStart Instrument Control Software Version 2.2.1 (Windows 10, 8, 7 compatible)
KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features • Save time by automating data collection of millions of readings. • Set up a multi-instrument test with the ability to …

Part Number: KICKSTART-2.2.1
Application
Installing KTTI Communication Modules DMM6510 DAQ6500
1. Remove the Communication Accessory Cover from the rear panel of the instrument. 2. Insert the Accessory Card into the slot. 3. Line up the black connector on the rear of the card with the two tabs on the PCB inside the instrument. 4. Press …
Faq Id714366
Which 2000-series scan cards for the DMM6500/Model 2000 are supported in KickStart?
KickStart only supports two scan cards for the DMM instruments (DMM6500, 2000, 2001, etc.):    1. Model 2000-SCAN    2. Model 2001-TCSCAN KickStart does not support:    Model 2001-SCAN    Model 2000-SCAN-20
Faq Id780936
How do I perform a digitized current measurement on a Keithley DMM6500?
For this example: making a 1kS/s digitized current measurement with 2000 Samples. Buffer Settings: Press MENU Under the Measure Tab, press Reading Buffers Change capacity to 200000 I set Fill Mode to Once (but continuous also worked) Be sure to …
Faq Id471651
Replacing Fuses/Changing Line Voltage DMM6500 DAQ6510
Line Voltage Remove the fuse housing above the line power plug. Remove the fuse from the housing and replace with the appropriate, functioning fuse. Change the power line voltage setting by removing the inner housing for the fuse and rotating …
Faq Id714431
DMM6500 6½-Digit Bench/System Digital Multimeter Datasheet

Literature Number: 1KW-61315-0
Datasheet
Model DMM6500 6½-Digit Multimeter With Scanning Calibration

This manual provides instructions to help you calibrate and adjust your Keithley Instruments Model DMM6500. In this manual, the term "calibration" refers to the process of verifying that the accuracy of the instrument is within its one-year accuracy specifications. The term "adjustment" refers to the process of changing the calibration constants


Part Number: DMM6500-905-01C
Service
Model DMM6500 Quick Start Guide
Model DMM6500 6½ Digit Multimeter System Quick Start Guide contains basic information to get you started when you first receive your instrument.

The Model DMM6500 6-1/2 Digit Bench/System Multimeter with Scanning Quick Start Guide provides unpacking instructions, describes basic connections, reviews basic operation information, and provides a quick test procedure to ensure the instrument is operational. This revision is intended for use with firmware version 1.7.0 and later.


Part Number: DMM6500-903-01B
Primary User
Model DMM6500 6½ Digit Multimeter with Scanning Reference Manual
Reference Manual for the Model DMM6500 6½-Digit Touchscreen Multimeter.

The Model DMM6500 6½-Digit Multimeter with Scanning Reference Manual is a complete reference that contains information on general operation, functions and features, using SCPI and TSP commands over a remote interface, maintenance, using the status model and more. This revision is intended for use with firmware version 1.7.0 and later.


Part Number: DMM6500-901-01B
Primary User
KickStart Quick Start Guide

KickStart Instrument Control Software lets you start making measurements in minutes without complex instrument programming. KickStart allows you to do I-V characterization, data acquisition and logging, and power supply control on a variety of Keithley products.


Part Number: KKS-903-01H
Primary User
Using the Model DMM6500 in a Keysight 34401A application
Using the Model DMM6500 6½ Digit Multimeter in a Keysight 34401A application

This document provides information about using the DMM6500 as a drop-in replacement in a Keysight 34401A test system application, and also provides a guide to migrating from a Keysight 34401A to a DMM6500 in native mode.


Part Number: 077146700
User
2001-TCSCAN Thermocouple General Purpose Scanner Card Specifications

This document contains specifications and supplemental information for the Model 2001-TCSCAN Thermocouple General Purpose Scanner Card. Specifications are the standards against which the 2001-TCSCAN is tested.


Part Number: SPEC-2001-TCSCAND
User
Model DMM6500 and DAQ6510 Declassification and Security Instructions
Model DMM6500 and DAQ6510 Declassification and Security Instructions

If you have data security concerns, this document tells you how to clear or sanitize the Keithley Instruments Model DMM6500 and DAQ6510 memory devices. It also explains how to declassify an instrument that is not functioning.


Part Number: 077145400
Declassification
KTTI-RS232 Communication and Digital I/O Accessory Instruction Sheet
KTTI-RS232 Communication and Digital I/O Accessory Instruction Sheet

The KTTI-RS232 Communication and Digital I/O Accessory provides instruments with an accessory card slot with an RS-232 interface.


Part Number: 077143600
User
KTTI-TSP Communication and Digital I/O Accessory Instruction Sheet
KTTI-TSP Communication and Digital I/O Accessory Instruction Sheet

The KTTI-TSP Communication and Digital I/O Accessory card provides instruments that have an accessory card slot with a TSP-Link® interface that allows the instrument to trigger and communicate with other TSP-Link equipped instruments.


Part Number: 077143800
User
KTTI-GPIB Communication and Digital I/O Accessory Instruction Sheet
KTTI-GPIB Communication and Digital I/O Accessory Instruction Sheet

The KTTI-GPIB Communication and Digital I/O Accessory provides Keithley products that have a compatible accessory card slot with an IEEE-488 standard parallel interface.


Part Number: 077143700
User
KickStart 2.0 Quick Start Guide Beta
KickStart 2.0 Quick Start Guide Beta

This guide contains basic instructions for the KickStart software.


Part Number: KKS-903-01E
User
Model DMM6500 Specifications
Model DMM6500 6½-Digit Touchscreen Multimeter Specifications

This document contains specifications and supplemental information for the DMM6500. Specifications are the standards against which the DMM6500 is tested.


Part Number: SPEC-DMM6500A
User
Using the Model DMM6500 in a Model 2000 application
Using the Model DMM6500 6½ Digit Multimeter in a Model 2000 Multimeter application.

This document provides information about using the DMM6500 as a drop-in replacement in an existing Keithley Instruments Model 2000 test system application.


Part Number: 077146600
User
Modèle DMM6500 Liste d'avertissements
Warnings from the DMM6500 manual documentation that are provided in French for the Canadian market.

Warnings from the DMM6500 manual documentation that are provided in French for the Canadian market.


Part Number: 077145700
User
KickStart Instrument Control Software Version 2.2.0 (Windows 10, 8, 7 compatible)
"KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features • Save time by automating data collection of millions of readings. • Set up a multi-instrument test with the …

Part Number: KICKSTART-2.2.0
Application
Clock TSPAPP V2.0
Highlights the customization capability by displaying an animated analog clock.

Part Number: TSPAPP-CLOCK-V2.0.0
Application
Fuse & Information TSPAPP V2.0
Diagnostic tool that lists hardware parameters and detects a damaged fuse or a non-functional fan.

Part Number: TSPAPP-FUSE-INFO-V2.0.0
Application
DMM6500 Firmware V1.7.0 and Release Notes
Firmware version 1.7.0 for the Model DMM6500 6½-digit Multimeter System.

Part Number: DMM6500-FRP-V1.7.0
Firmware
Introduction for DMM6500 TSPAPP V2.0
Showcases selected features of the DMM6500.

Part Number: TSPAPP-INTRO-DMM6500-V2.0.0
Application
Channel Measurement Grid TSPAPP V2.0
Displays 12, 20, or 40 channels of measurements at a time during a channel scan.

Part Number: TSPAPP-CHAN-GRID-V2.0.0
Application
KickStart Instrument Control Software Version 2.1.1 (Windows 10, 8, 7 compatible)
"KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features • Save time by automating data collection of millions of readings. • Set up a multi-instrument test with the …

Part Number: KICKSTART-2.1.1
Application
KickStart Instrument Control Software Version 2.1.0 (Windows 10, 8, 7 compatible)
"KickStart Software for the PC enables quick test setup and data visualization when using one or more instruments. Key Features • Save time by automating data collection of millions of readings. • Set up a multi-instrument test with the …

Part Number: KICKSTART-2.1.0
Application
Test Script Builder Software Suite Version J03 (Windows 10, 8, 7, Vista Compatible)
"Keithley Instruments Test Script Builder (TSB) is a software tool that simplifies building and creating test scripts. It includes built-in color coding, debugging tools, and error handling. You can use TSB to perform the following operations: …

Part Number: KTS-850J03
Application
Keithley I/O Layer version C10 (Windows 10, 8, 7 Compatible)
Keithley I/O Layer version C10 (KIOL-850C10 adds support for Windows 10 Operating System and installs NI-VISA Runtime 17.5 and NI-ICP 17.0. This release replaces previous versions of KIOL-850B07, KIOL-850C02, KIOL-850C03, KIOL-850C04, KIOL-850C05 …

Part Number: KIOL-850C10
Application
DMM6500 Firmware V1.0.04 and Release Notes
Firmware version 1.0.04 for the Model DMM6500 6?-digit Multimeter System.

Part Number: DMM6500-FRP-V1.0.04
Firmware
DMM6500 Firmware V1.0.03 and Release Notes
Firmware version 1.0.03 for the Model DMM6500 6½-digit Multimeter System.

Part Number: DMM6500-FRP-V1.0.03
Firmware
Test Script Builder Software Suite Version J02 (Windows 10, 8, 7, Vista Compatible)
"Keithley Instruments Test Script Builder (TSB) is a software tool that simplifies building and creating test scripts. It includes built-in color coding, debugging tools, and error handling. You can use TSB to perform the following operations: …

Part Number: KTS-850J02
Application
DMM6500 Firmware V1.0.01 and Release Notes
Firmware version 1.0.01 for the Model DMM6500 6½-digit Multimeter System.

Part Number: DMM6500-FRP-V1.0.01F
Firmware
Channel Measurement Grid TSPAPP
Channel Measurement Grid App that displays 12, 20, 40 channels. Currently supported by models DMM6500 and DAQ6510 with at least version 1.0.0a firmware.

Part Number: TSPAPP-CHAN-GRID-V1.0.0
Application
TSPAPP-RELAY-COUNT-V1.0.0
Relay Count app for model DAQ6510 that tests all relay counts and displays the results. Requires firmware version 1.0.0a or newer.

Part Number: TSPAPP-RELAY-COUNT-V1.0.0
Application
TSPAPP-INTRO-DMM6500-V1.0.0
Intro app for model DMM6500 that runs through some new features. Requires firmware version 1.0.0a or newer.

Part Number: TSPAPP-INTRO-DMM6500-V1.0.0
Application
TSPAPP-FUSE-INFO-V1.0.0
Fuse/Info App that helps detect a blown fuse and non-functional fan and displays the results in a popup dialog. It can also be used to query localnode.info() information. Currently supported by models DMM6500 and DAQ6510 with at least version 1.0.0a …

Part Number: TSPAPP-FUSE-INFO-V1.0.0
Application
TSPAPP-CLOCK-V1.0.0
Displays an analog clock linked to the machine‚s time. Currently supported by models DMM6500 and DAQ6510 with at least version 1.0.0a firmware.

Part Number: TSPAPP-CLOCK-V1.0.0
Application
Model DMM6500 6½-Digit Bench/System Multimeter Specifications
Specifications for the DMM6500 6½-Digit Bench/System Multimeter

Literature Number: SPEC-DMM6500
Specification
Digital Multimeters Comparison Table
Table comparing DC volts, AC volts, ohms, DC amps, AC amps, and other measurement capabilities of Keithley and Tektronix DMMs.

Literature Number: 1KW-61264-2
Product Selector Guide
Digital Multimeters (DMM) Selector Guide
Complete guide to selecting Tektronix and Keithley digital multimeters (DMMs) including features, benefits, measurement capabilities, and comparison of models.

Literature Number: 1KW-61350-1
Selection Guide
DAQ Data Acquisition Primer: An Introduction to Multi-Channel Measurement Systems
This data acquisition primer offers tips and techniques for making multi-channel measurements in a variety of applications.  Learn about: Relay types and switch card options for making multi-channel measurements Switch card configuration …

Literature Number: 1KZ-61325-0
Primer
How to Increase Productivity by Networking Instruments
This technical note gives high-level setup steps for connecting to Keithley instruments with web enabled services (automatic and manual networking configuration.)  Web tools such as the informative home and administration screens, send and receive …

Literature Number: 1KW-61433-0
Technical Brief
Keithley’s DMM6500 6½-Digit Touchscreen Bench/System Digital Multimeter

Literature Number: 1KZ-61520-0
Fact Sheet
Data Logging of Power Profiles from Wireless IoT and Other Low-Power Devices
This application note illustrates different methodologies that can be used for capturing the load current characteristics of a device or the voltage discharge profile of a battery.

Literature Number: 1KW-61357-0
Application Note
DMM6500 and DAQ6510 - Touchscreen Productivity, 15 Measurement Functions, Greater Sensitivity, and More Connectivity
This document provides a concise overview of the features, benefits, and capabilities of Keithley's new DMM6500 6½-digit Bench/System Digital Multimeter and the DAQ6510 Data Acquisition and Logging Multimeter System.

Literature Number: 1KW-61384-0
Fact Sheet
How do you set ACV DB function in Model DMM6500?
In the SCPI command set mode, the following commands will get you there: :SENSE:FUNC 'VOLT:AC' :VOLT:AC:UNIT DB :SENSE:VOLT:AC:DET:BAND 300 :SENSE:VOLT:AC:DB:REF 5 This will set the unit to ACV, db and reference of 5.   If the unit is set to TSP …
Faq Id729491
How do I perform a temperature scan using Keithley DMM6500 and 2001-TCSCAN?
Cycle power to the 6500. Select TEMP. Press MENU. In the CHANNEL column, select Settings. Select channel 1. Select Function to Temperature. Select Transducer to CJC2001. Select Unit to F. Select Channel 2. Select Function to Temperature …
Faq Id471676