I have a Tektronix DPO3000 or MSO3000 instrument that I would like to upgrade the bandwidth on.
DPO3000 and MSO3000 100MHz and 300MHz models with product Software revision 2.38 or greater can be upgraded to a higher bandwidth (300MHz and 500MHz, respectively).
Models starting with serial number C02XXXX/B020XXX can be upgraded by the customer by ordering one of the following upgrades, which are software key enabled.
2 Ch Bandwidth Upgrade from 100 MHz to 300MHz DPO3BW1T32
4 Ch Bandwidth Upgrade from 100 MHz to 300MHz DPO3BW1T34
2 Ch Bandwidth Upgrade from 100 MHz to 500MHz DPO3BW1T52
4 Ch Bandwidth Upgrade from 100 MHz to 500MHz DPO3BW1T54
2 Ch Bandwidth Upgrade from 300 MHz to 500MHz DPO3BW1T52
4 Ch Bandwidth Upgrade from 300 MHz to 500MHz DPO3BW1T54
Products with serial number starting C01XXXX/B01XXXX will require Tektronix Service Installation and re-calibration as they require a hardware change to increase the instrument bandwidth.
Please contact your local Tektronix sales office if you wish to order one of the above uprades for your instrument.
This FAQ Applies to:
Product Series: MSO3000 / DPO3000
FAQ ID 64621View all FAQs »