I connected the Trigger Out from my logic analyzer to my Oscilloscope but it does not send a trigger pulse to the scope. What could be the problem with the logic analyzer?

Question:

I connected the Trigger Out from my logic analyzer to my Oscilloscope but it does not send a trigger pulse to the scope. What could be the problem with the logic analyzer?

Answer:

One can turn off the System Trigger Out on the Logic Analyzer. Please check this setting from: System -> System Trigger... Check the box for Enable System Trigger Out.

This FAQ Applies to:

Product Series: TLA7000, TLA7000, TLA7000

Product: TLA714, TLA721, TLA601, TLA602, TLA603, TLA604, TLA611, TLA612, TLA613, TLA614, TLA621, TLA622, TLA623, TLA624, TLA7Q4, TLA7AB4, TLA7N1, TLA7N2, TLA7N3, TLA7N4, TLA7P2, TLA7P4, TLA7Q2, TLA7AA1, TLA7AA2, TLA7AA3, TLA7AA4, TLA7AB2, TLA7L1, TLA7L2, TLA7L3, TLA7L4, TLA7M1, TLA7M2, TLA7M3, TLA7M4, TLA5201, TLA5202, TLA5203, TLA5204, TLA7NA1, TLA7NA2, TLA7NA3, TLA7NA4, TLA7012, TLA7016

FAQ ID : 55791

View all FAQs »
Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top