What are the difference in the AFG1022 and AFG3022C?
1. AFG1022 channel 2 is a continues signal only no modulation, burst, or sweep. AFG3022C has full function on both channels.
2. AFG1022 Phasing of channel 1 and 2 is only available on for Sine wave below 1 MHz. AFG3022C has phase control on any signal type and frequency.
3. AFG1022 is only able to Burst on channel 1 Sine, Square, Ramp, Pulse, and Arb signal. It cannot Burst any signal under the Noise button. AFG3022C may burst on any signal type.
This FAQ Applies to:
FAQ ID 468361View all FAQs »