DSA8300 Digital Sampling Oscilloscope

DSA8300 Digital Sampling Oscilloscope

With intrinsic jitter of less than 100 femtoseconds for extremely accurate device characterization, the DSA8300 Series provides comprehensive support for Optical Communications Standards, Time Domain Reflectometry and S-parameters. The DSA8300 Digital Sampling Oscilloscope is a complete high-speed PHY Layer testing platform for data communications from 155 Mb/sec to 400G PAM4. See all oscilloscopes »

Features

Benefits

Electrical module signal measurement accuracy:
  • Ultra-low system jitter (<100 fs, typical)
  • > 70GHz
<100 fs intrinsic jitter enables the characterization of high bit-rate (40 and 100 (4´25) Gb/s) devices with typically <5% of the signal’s unit interval being consumed by the test instrumentation. 70 GHz bandwidth allows full characterization of high bit-rate signals (5th harmonic to data rates of 28 Gb/sec and 3rd harmonic to data rates >45 Gb/sec).
Industry’s lowest system noise at all bandwidths:
  • 600 µV max (450 µV typ.) @ 60 GHz
  • 380 µV max (280 µV typ.) @ 30 GHz
Minimizes the amount of instrumentation noise when acquiring high bit-rate, low-amplitude signals to eliminate additional noise which can exhibit itself as additional jitter and eye closure.
Up to 6 channels simultaneous acquisition at <100 fs jitter in a single mainframe. High fidelity acquisition of multiple differential channels enables testing for cross channel impairments and improves the test throughput for systems with multiple high-speed serial channels.
Optical modules support optical compliance test of all standard rates from 155 Mb/s to 100 Gb/s (4x25) Ethernet. Provides cost-effective and versatile optical test system for single and multi-mode optical standards from 155 Mb/s (OC3/STM1) to 40 Gb/s (SONET/SDH and 40GBase Ethernet) and 100 Gb/s Ethernet (100GBase-SR4, -LR4 and ER4) at 850, 1310 and 1550nm.
Superior acquisition throughput with up to 300 kS/s maximum sample rate. Reduced manufacturing or device characterization test-time by 4X with superior system throughput.
Ability to place the samplers adjacent to the device under test (DUT). Remote sampling heads minimize signal degradation due to cabling and fixturing from DUT to instrumentation and simplifies test system de-embed.
Independent calibrated channel de-skew. Having integrated, calibrated channel deskew in dual channel modules, enhances signal fidelity for multi-channel measurements by eliminating skewing.

 


Models

Model Analog Bandwidth Sample Rate Record Length Analog Channels List Price
DSA8300 70 GHz Electrical, 80 GHz Optical Up to 300 kS/s 50 points - 16,000 points (1M points with IConnect®, 10M points for 80SJNB) Determined by the sampling modules used, up to 8 channels
-
Configure & Quote
Model DSA8300
Analog BandwidthSample RateRecord Length
70 GHz Electrical, 80 GHz OpticalUp to 300 kS/s50 points - 16,000 points (1M points with IConnect®, 10M points for 80SJNB)
Analog Channels
Determined by the sampling modules used, up to 8 channels
Model Analog Bandwidth Sample Rate Record Length Analog Channels List Price
DSA8300 70 GHz Electrical, 80 GHz Optical Up to 300 kS/s 50 points - 16,000 points (1M points with IConnect®, 10M points for 80SJNB) Determined by the sampling modules used, up to 8 channels
-
Configure & Quote
Model DSA8300
Analog BandwidthSample RateRecord Length
70 GHz Electrical, 80 GHz OpticalUp to 300 kS/s50 points - 16,000 points (1M points with IConnect®, 10M points for 80SJNB)
Analog Channels
Determined by the sampling modules used, up to 8 channels
Data SheetSoftware Package / Software OptionDescriptionConfigure and Quote
100G-SR4

Automated Compliance and Debug Testing Solution for 100GBASE-SR4 and Transmitter and Dispersion Eye Closure (TDEC)

Contact Us
80SICMX ICONNECT AND MEASUREXTRACTOR SIGNAL INTEGRITY AND FAILURE ANALYSIS SOFTWARE Configure & Quote
80SICON ICONNECT SIGNAL INTEGRITY AND FAILURE ANALYSIS SOFTWARE Configure & Quote
80SJNB PAM4

Comprehensive tools for PAM4 Modulation Analysis

Contact Us
80SJNB, 80SJARB

Jitter, Noise, and BER Analysis Software.

Contact Us
80SJNB01

Jitter, Noise, and BER Analysis Advanced

Contact Us
80SJNB02

Jitter, Noise, and BER Analysis Software with SDLA Visualizer

Contact Us
80SSPAR ICONNECT S-PARAMETERS AND Z-LINE SOFTWARE Configure & Quote
CEI-VSR

Automated Compliance and Debug Solution for CEI-28G-VSR testing software.

Contact Us
Opt. 400G-M4

400G Optical Manufacturing analysis software, 4 channel TDECQ

Contact Us
Datasheet LinkProbeDescriptionConfigure and Quote
DVT30-1MM GigaProbe

30 GHz TDR probe available from GigaProbes.

Contact Us
P8018 HANDHELD TDR PROBE, PASSIVE; 20 GHZ, SINGLE-ENDED, 50 OHM, SMA CONNECTOR WITH 20 GHZ SMA CABLE; DESIGNED TO WORK WITH 80A02 EOS/ESD PROTECTION MODULE; STATEMENT OF COMPLIANCE INCLUDED WITH THIS PRODUCT Configure & Quote
P80318 Probe kit,18GHz 100 Ohm Differential Hand Probe Configure & Quote
Data SheetModuleDescriptionConfigure and Quote
80A02 EOS/ESD PROTECTION MODULE FOR ELECTRICAL STATIC ISOLATION OF TEKTRONIX ELECTRICAL SAMPLING MODULES;STATEMENT OF COMPLIANCE INCLUDED WITH THIS PRODUCT Configure & Quote
80C07B OPTICAL SAMPLING MODULE; 2.488 GB/S OC48/STM16,2.500 GB/S 2GBE,2.500 GB/S INFINIBAND;2.5 GHZ OPTICAL BANDWIDTH Configure & Quote
80C08D Single channel optical sampling module; 10G Optical Reference Receiver Filters; 12 GHz optical bandwidth; single-/multi-mode Configure & Quote
80C10C Single Channel, 65/80 GHz Optical Sampling Module(must specify one of options F1, F2, or F3) Configure & Quote
80C11B Single channel optical sampling module; 10G Optical Reference Receiver Filters; 28 GHz optical bandwidth; single-mode Configure & Quote
80C12B 12 GHz, Broad WaveLength, Amplified Optical Sampling Module Configure & Quote
80C14 14+ GHz, Broad WaveLength, Amplified Optical Sampling Module Configure & Quote
80C15 8000 Series Optical Module: single channel, 32GHz optical bandwidth, single/multi-mode, 800nm to 1600nm Configure & Quote
80C17 8000 Series Optical Module: single channel, 30GHz optical bandwidth, single/multi-mode, 800nm to 1600nm Configure & Quote
80C18 8000 Series Optical Module: dual channel, 30GHz optical bandwidth, single/multi-mode, 800nm to 1600nm Configure & Quote
80C20

8000 Series Optical Module: single channel, 53GHz optical bandwidth, single-mode, 1200nm to 1650nm

Configure & Quote
80C21

8000 Series Optical Module: dual channel, 53GHz optical bandwidth, single-mode, 1200nm to 1650nm

Configure & Quote
80E03 SAMPLING MODULE; DUAL,20 GHZ ELECTRICAL SAMPLING MODULE - CERTIFICATE OF TRACEABLE CALIBRATION STANDARD Configure & Quote
80E04 SAMPLING MODULE; DUAL,20 GHZ W/TDR ELECTRICAL SAMPLING MODULE - CERTIFICATE OF TRACEABLE CALIBRATION STANDARD Configure & Quote
80E07B 8000 Series, Dual Channel, 30 GHz, Remote Electrical Sampling Module (includes D1) Configure & Quote
80E08B 8000 Series, Dual Channel, 30 GHz, Remote Electrical Sampling Module w/ TDR (includes D1) Configure & Quote
80E09B 8000 Series, Dual Channel, 60 GHz, Remote Electrical Sampling Module (includes D1) Configure & Quote
80E10B 8000 Series, Dual Channel, 50 GHz, Remote Electrical Sampling Module w/ TDR (includes D1) Configure & Quote
80E11 8000 Series, Dual Channel, 70 GHz, Ultra-low Jitter, Electrical Sampling Module (includes D1) Configure & Quote
80E11X1 8000 Series, Single Channel, 70 GHz, Ultra-low Jitter, Electrical Sampling Module (includes D1) Configure & Quote
82A04B 8000 Series, Phase Reference Module (includes D1) Configure & Quote
This webinar covers new technologies and techniques for 100G/400G optical transmitter (TX) testing that will help you accelerate your product development and maximize your manufacturing test efforts.
0h 18m 32s
At OFC 2018 it’s not just about speed but also interoperability both between standards and among equipment vendors.
0h 3m 26s
Learn how more margin and higher yields are made possible with lowest optical noise, highest sensitivity solution available today. 
0h 1m 33s
At this booth, we're demonstrating our DS8300 Digital Sampling Oscilloscope including new PAM4 software modules.
0h 2m 9s
Watch Tektronix experts as they provide a brief overview of test technologies being demonstrated on 100G components, transceivers and systems for the Datacom and Long Haul Networking Design Segments.
0h 2m 15s
During ECOC 2014, Tektronix demonstrated 56 Gb/s Eye Diagram analysis on a DSA8300 Sampling Oscilloscope.
0h 2m 9s
See how to conduct PAM-4 Analysis using PPG3204 Pattern Generator and DSA8300 Sampling Oscilloscope on multi-level eye diagrams.
0h 2m 5s
Watch Tektronix experts as they provide a brief overview of test technologies being demonstrated on 100G components, transceivers and systems for the Datacom and Long Haul Networking Design Segments.
0h 2m 7s
Watch Tektronix experts as they provide a brief overview of test technologies being demonstrated on 100G components, transceivers and systems for the Datacom and Long Haul Networking Design Segments.
0h 4m 36s
View this demonstration of interoperability at OFC2013 using Tektronix DSA8300 Sampling Oscilloscope and BSA286C BERTScope. Tektronix assisted the Optical Internetworking Forum (OIF) and member…
0h 4m 55s
DSA8300
This document lists the warranted and typical specifications for the DSA8300 mainframe instrument as well as for the 80AXX, 80CXX, and 80EXX sampling modules.
Part number: 077057100
Performance Verification
DSA8300
Supports TekScope version 6.1.X and greater. This PDF file is a printable version of the DSA8300 Series online help content.
Part number: 077056901
Online Help
DSA8300
Supports TekScope version 6.2.X and greater. This PDF file is a printable version of the DSA8300 Series online help content.
Part number: 077056902
Online Help
DSA8300 Digital Serial Analyzer
Supports DSA8300 TekScope release 6.2.X. This document describes how to install TekScope application and other software on the DSA8300 Digital Serial Analyzer sampling oscilloscope.
Part number: 071289802
Field Install Instructions
DSA8300
For DSA8300 instruments with serial number C040000 (GSA serial number B020000) and later. This document describes how to restore (rebuild) the operating system and application software on the DSA8300 Digital Serial Analyzer hard drive.
Part number: 071316200
Field Install Instructions
DSA8300 Digital Serial Analyzer
For DSA8300 TekScope release 6.2.1.X and greater. Instructions to install TekScope application and related software on the DSA8300 Digital Serial Analyzer sampling oscilloscope.
Part number: 071289804
Field Install Instructions
DSA8300 Digital Serial Analyzer
Describes how to use the Tektronix DSA8300 Digital Serial Analyzer to take 25 Gb/s measurements supporting the 802.3bm 100GBASE-KR4 backplane standard.
Part number: 071320701
Training/Tutorials
DSA8300 Digital Serial Analyzer and Modules
This document describes adjustments, troubleshooting, and repair procedures, including exploded views and replaceable parts lists.
Part number: 077057200
Service
DSA83UP
This kit provides upgrade instructions for the DSA8300 Digital Serial Analyzer instrument. The kit includes the instrument application software and documentation (as PDF files).
Part number: 075103701
Field Install Instructions
DSA8300 Series, Rev A
This document includes information that is necessary to clear or sanitize the DSA8300 product so it can be removed from a secured area, such as when returning the product for repair.
Part number: 077057600
Declassification
DSA8300 and Sampling Modules
Supports DSA8300 TekScope application 6.1.X and greater. This document lists the performance verification procedures for the DSA8300 mainframe instrument and supported optical and electrical sampling modules.
Part number: 077068201
Performance Verification
DSA8300, CSA/DSA/TDS8000 Series
Supports TekScope SW V6.2 (DSA8300), V5.2 (CSA/TDS/DSA8200). The Differential Channel Alignment application aligns channel acquisition and TDR step, and calibrates channel delay and TDR step deskew, for supported 80E00 series electrical sampling modules.
Part number: 077077500
Online Help
DSA8300
Supports DSA8300 TekScope SW version 6.3.1.X and later. This document describes GPIB commands used to remotely control the DSA8300 Digital Serial Anayzer sampling oscilloscope.
Part number: 077057003
Programmer
DSA8300 Series
This manual describes the installation and operation of the DSA8300 Digital Serial Analyzer along with basic operation and concepts.
Part number: 071289700
Primary User
80X01 and 80X02
These instructions describe how to install the 80X01 (1 meter) or 80X02 (2 meter) module extender cable. For use with 80E01, 80E02, 80E03, 80E04, 80E06, 82A04B, 80E11, and 80E11X1 electrical sampling modules.
Part number: 071320600
Field Install Instructions
DSA8300 Performance Verification Technical Reference
This document lists the performance verification procedures for the DSA8300 mainframe instrument as well as for the 80AXX, 80CXX, and 80EXX sampling modules.
Part number: 077068200
Performance Verification
DSA8300
Supports DSA8300 TekScope SW version 6.2.X and later. This document describes GPIB commands used to remotely control the DSA8300 Digital Serial Anayzer sampling oscilloscope.
Part number: 077057002
Programmer
DSA8300 Digital Serial Analyzer
For DSA8300 TekScope release 6.2.1.X and greater. Instructions to install TekScope application and related software on the DSA8300 Digital Serial Analyzer sampling oscilloscope.
Part number: 071289803
Field Install Instructions
DSA8300
This document describes adjustments, troubleshooting, and repair procedures, including exploded views and replaceable parts lists.
Part number: 077057201
Service
DSA8300 Series
This document supports DSA8300 TekScope application 6.2.X. This document describes the installation and basic operation concepts of the DSA8300 Digital Serial Analyzer.
Part number: 071289702
Primary User
80A00 and 82A00 Series
Supports TekScope version 6.2.x (DSA8300), 5.2.x (DSA8200). This document describes installation procedures and software compatibility information for the 80A00 and 82A00 Modules for the DSA8300 and legacy TDS/CSA/DSA8X00 series instruments.
Part number: 071138613
User
DSA8300 Series
This document supports DSA8300 TekScope application 6.3.X. This document describes the installation and basic operation concepts of the DSA8300 Digital Serial Analyzer.
Part number: 071289703
Primary User
DSA8300 Quick Start User Manual
Supports TekScope version 6.3.1.X and greater. This manual describes the installation and controls of the DSA8300 Digital Serial Analyzer, along with key operations and concepts.
Part number: 071289704
Primary User
80SJNB
This document provides operating and programming instructions for the 80SJNB software application. 80SJNB provides Jitter, Noise, and BER analysis and features for de-embedding of the fixture, channel emulation, and FFE/DFE equalizer support. This version…
Part number: 077064101
Primary User
DSA8300
Supports TekScope version 6.3.1.X and greater. This PDF file is a printable version of the DSA8300 Digital Serial Analyzer TekScope application help content.
Part number: 077056903
Online Help
DSA8300
Supports DSA8300 TekScope SW version 6.1.X. This document describes GPIB commands used to remotely control the DSA8300 Digital Serial Anayzer sampling oscilloscope.
Part number: 077057001
Programmer
DSA8300
This document describes how to restore the Microsoft Windows 7 Ultimate (32 bit) operating system software on a Tektronix DSA8300 Digital Serial Analyzer intrument.
Part number: 071289900
Field Install Instructions
DSA8300 CEI-VSR
This document is a PDF version of the TekExpress CEI-VSR help system. It contains installation and operatating information for product, which provides an automated, simple, and efficient way to test CEI-VSR Host to Module and Module to Host Interfaces to…
Part number: 077087200
Online Help
DSA83UP
This kit provides upgrade instructions for the DSA8300 Digital Serial Analyzer instrument. The kit includes the instrument application software, documentation (as PDF files), and a hard disk drive assembly if ordered with option HDD8.
Part number: 075103702
Field Install Instructions
DSA8300 Series
This document supports DSA8300 TekScope application 6.1.X. This document describes the installation and basic operation concepts of the DSA8300 Digital Serial Analyzer.
Part number: 071289701
Primary User
DSA8300 and Sampling Modules
Supports DSA8300 TekScope application 6.1.X and greater. This document lists the performance verification procedures for the DSA8300 mainframe instrument and supported optical and electrical sampling modules.
Part number: 077068202
Performance Verification
DSA8300 Oscilloscope Firmware for Windows 7 V6.3.1.5

Part number: 066133310
Firmware
Serial Data Link Analysis Visualizer, DSA8300 JNB02, V2.2.0
Serial Data Link Analysis Visualizer, DSA8300 JNB02, V2.2.0
Part number: 066168400
Application
TekExpress RIN Automated Measurement Solution Software application v1.0.0

Part number: 066165900
Application
CEI-VSR - OIF CEI 3.0 Compliance Solution for DSA8300

Part number: 066161501
Application
DSA8300…This manual describes the installation and operation of the DSA8300 Digital Serial Analyzer along with basic operation and concepts.
Part number: 071289700
Primary User
DSA8300 and 80A00, 80C00, 80E00, 80N01, 80X00, 82A00 Sampling Modules Declassification and Security
This document includes information that is necessary to clear or sanitize the DSA8300 product and related sampling modules so it can be removed from a secured area, such as when returning the product for repair.
Part number: 077057604
Declassification
2019 Tektronix and Keithley Product Catalog
Browse the new Tektronix and Keithley Product Catalog and explore our complete line of test and measurement solutions. You will find over 90 pages of key product details and specifications, application information, quick-reference selection guides and…
Selection Guide 09 Sep 2019
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix.
Literature number: 46W-31080-5
Selection Guide 29 Aug 2019
XYZs of Oscilloscopes Primer
After reading this primer, you will be able to: Describe how oscilloscopes work, Describe the differences between analog, digital storage, digital phosphor, and digital sampling oscilloscopes, describe electrical waveform types, understand basic…
Literature number: 03Z-8605-7
Primer 27 Aug 2019
Equalization and Serial Data Link Analysis Methods (SDLA) with 80SJNB Advanced Application Note
Describes the Equalization concept and SDLA methods using the 80SJNB.
Literature number: 61W-21428-1
Application Note 14 Aug 2019
Variations in 10 Gigabit Ethernet Laser Transmitter Testing Using Reference Receivers
One of the key tools used by telecom/datacom original equipment manufacturers, system installers and system servicers to view eye patterns on an oscilloscope and test the quality of a laser’s time-domain signal is the reference receiver (RR).
Literature number: 85W-16691-1
Application Note 14 Aug 2019
5 and 6 Series MSO 12-bit Scope
Yes! Tektronix offers many different models of real-time oscilloscopes that provide 12-bit or greater vertical resolution for a variety of applications. Because many high-vertical-resolution oscilloscopes on the market have technical trade-offs such as…
FAQ ID: 69266 29 Jul 2019
DSA8300 and 80A00, 80C00, 80E00 Sampling Modules Performance Verification
Supports DSA8300 TekScope Application Software 6.3.1.x and above. This document describes the performance verification procedures for the DSA8300 Digital Serial Analyzer and supported electrical, optical, and accessory sampling modules.
Part number: 077068205 Rev A
Performance Verification
How do I use TekVISA to send commands to my instrument?
TekVISA Download Link:TEKVISA CONNECTIVITY SOFTWARE In order to communicate with and control the scope, you can use OpenChoice Talker-Listener. Back on the Application and Utilities panel, click on OpenChoice Talker Listener and click Start Application…
FAQ ID: 69181 25 Jun 2019
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the correct…
FAQ ID: 69186 25 Jun 2019
DSA8300 Digital Serial Analyzer, 80C00/80E00/80A00 modules Specifications
This document lists the warranted and typical specifications for the DSA8300 Digital Serial Analyzer, 80C00 Series Optical Sampling Modules, 80E00 Series Electrical Sampling Modules, and 80A00 Modules.
Part number: 077057105
Performance Verification
100G-TXE - IEEE-802.3bj:CR4/KR4 and IEEE-802.3bm:CAUI4 Transmitter Compliance Solution for DSA8300 - V1.0.1.96
The TekExpress 100G-TXE automation test solution facilitates turnkey electrical transmitter validation of 100GBASE-CR4, 100GBASE-KR4, and CAUI-4 standards of IEEE.
Part number: 066190501
Application
400G-M4 PAM4 Optical Manufacturing TDECQ Analysis Software for Tektronix DSA8300 - V1.1.0.12
PC based analysis software package provides up to 4 channel support enabling higher throughput rates through parallel channel acquisition and processing. Features in the DSA8300 400G-M4 Analysis include:? Support for 4 channel simultaneous acquisition?…
Part number: 066134770
Application
CEI-VSR - OIF CEI 3.1 Compliance Solution for DSA8300 - V1.3.1.160
The Tektronix CEI-VSR is an automated compliance solution for testing OIF CEI 3.1 Compliance Solution, which includes Host to Module (TP1a) and Module to Host (TP4)CEI-VSR
Part number: 066172601
Application
Automation Answers Compliance Challenge
Interoperability and compliance concerns are commanding an ever-larger share of the serial system designer's attention.
Literature number: 55W-21408-0
Fact Sheet 25 Apr 2019
400G-TXO support IEEE 802.3bs and 802.3cd: 50GBASE-FR/LR, 100GBASE-DR, 200GBASE-DR4/ LR4/FR4 and 400GBASE-LR8/FR8/DR4 Optical Conformance and Characterization Solution for DSA8300 V 1.0.2
The 400G-TXO application package is an automated conformance and characterization solution for IEEE 802.3bs and IEEE 802.3cd specifications. This package operates on DSA8300 sampling instrument with 80C10C optical module. The 80S400G-TXO offers a…
Part number: 066191901
Application
TekExpress RIN Automated Measurement Solution Software Application - V1.1.2
TekExpress RIN provides an automated, simple, and efficient way to take RIN (Relative Intensity Noise) and RINxOMA (Optical Modulation Amplitude) measurements on optical signals.-RIN and RINxOMA measurements can be performed on PRBS7, PRBS9,PRBS11, PRBS13…
Part number: 066181602
Application
100GBASE-SR4 and TDEC Measurement Solution for DSA8300 - V1.1.2
The TekExpress 100GBASE-SR4 / TDEC Automated Measurement Solution provides turnkey testing and characterization of Tx Optical properties key to the SR4 Short Reach EthernetSpecifications outlined in IEEE 802.3bm.
Part number: 066179403
Application
80SJNB, 80SJARB, SDLA Visualizer and Scope Noise Characterization Application Software Release - V4.5.9.0, V4.0.4.0, V2.2.0.4, V 1.0.0.64
80SJNB, 80SJARB, SDLA Visualizer, and Scope Noise Characterization software run on the DSA8300 instruments with Windows 7 Operating System. This release of 80SJNB adds updates to TDECQ measurements in support of 100 ? 400 Gbps, PAM4 signal analysis, with…
Part number: 066134713
Application
NRZ-M4 Optical Manufacturing TDEC Analysis Software for Tektronix DSA8300 - V1.1.0.37
Tektronix NRZ-M4 is a PC based application which offers optical NRZ signaling analysis, including TDEC(Transmitter and Dispersion Eye Closure) measurement. The application brings together NRZ optical measurements in a simple and easy to use application.…
Part number: 066199900
Application
Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top