DPO7000C Series

DPO7000C Series

Bandwidths up to 3.5 GHz and sampling rates up to 40 GS/s make the DPO7000C Series a natural choice for analyzing critical, high-speed signals. Over 30 analysis packages provide in-depth measurements for communications standards, jitter analysis, memory bus standards, vector analysis and more. Plus, the Windows operating system lets you run your own analysis software right on the instruments.

Bandwidth

Up to 3.5 GHz

Analog channels

4

Record length

Up to 500
Mpoints

Sample Rates

Up to 40 GS/s

Advanced signal measurement and analysis

Thumbnail

Standard analysis tools include 53 automated measurements, measurement statistics, histograms, limit testing, advanced waveform math, user-definable filters and support for custom MATLAB and .NET math plug-ins. Specialized applications such as advanced jitter and eye analysis, and wideband RF analysis, can be added to extend the measurement capabilities.

Highlights

  • Characterize signal parameters with a suite of standard measurement tools
  • Advanced jitter and timing analysis characterizes signal integrity issues and their sources
  • SignalVu software provides wideband spectral analysis and measurements, with options for audio, modulation, RF pulses and settling time
  • TekScope AnywhereTM software enables offline measurements and analysis

Powerful triggering makes capture easy

Thumbnail

Easily capture signal anomalies, including glitches, runts, setup/hold violations and NRZ pattern lock for serial data streams up to 1.25 Gb/s, with Pinpoint® triggering and Visual Trigger and Search.

Highlights

  • More than 1,400 available trigger combinations
  • Quickly define complex triggers and search criteria graphically with Visual Trigger
  • Optional serial triggers provide protocol-aware signal capture capabilities

Serial analysis and compliance testing, done right

Thumbnail

Simplify advanced system design debug and verification with protocol decode and serial trigger options for low- and mid-speed buses. Ensure interoperability of mid-speed serial buses with automated compliance testing.

Highlights

  • Protocol decode with serial triggering and analysis options available for I2C, SPI, RS-232/422/485/UART, USB 2.0, Ethernet, MIL-STD-1553B, CAN, LIN, and FlexRay
  • Automated compliance testing packages available for USB 2.0, Ethernet, HSIC, MOST, and BroadR-Reach

Automated power measurements

Thumbnail

Automated measurements and reporting ensure simple, repeatable power quality, switching loss, magnetic loss, harmonics measurements and more meet the measurement demands of today’s efficient power converters. Plus, smart TekVPI current and differential probes reduce uncertainty and eliminate power measurement pitfalls.

Highlights

  • MOSFET switching loss and safe operating area analysis
  • Power factor and harmonics measurements for IEC61000-3-2 pre-compliance
  • In-circuit inductor and transformer loss measurements
  • USB power adapter compliance testing to USB2.0 Battery Charger Specification v1.1 and IEC 62684

Models

Model Analog Bandwidth Sample Rate Record Length Analog Channels List Price
DPO7054C 500 MHz 5 GS/s - 20 GS/s 25M points - 250M points 4 Configure & Quote
DPO7104C 1 GHz 5 GS/s - 20 GS/s 25M points - 250M points 4 Configure & Quote
DPO7254C 2.5 GHz 10 GS/s - 40 GS/s 25M points - 500M points 4 Configure & Quote
DPO7354C 3.5 GHz 10 GS/s - 40 GS/s 25M points - 500M points 4 Configure & Quote
ModelDPO7054C
Analog BandwidthSample RateRecord Length
500 MHz5 GS/s - 20 GS/s25M points - 250M points
Analog Channels
4
ModelDPO7104C
Analog BandwidthSample RateRecord Length
1 GHz5 GS/s - 20 GS/s25M points - 250M points
Analog Channels
4
ModelDPO7254C
Analog BandwidthSample RateRecord Length
2.5 GHz10 GS/s - 40 GS/s25M points - 500M points
Analog Channels
4
ModelDPO7354C
Analog BandwidthSample RateRecord Length
3.5 GHz10 GS/s - 40 GS/s25M points - 500M points
Analog Channels
4
Model Analog Bandwidth Sample Rate Record Length Analog Channels List Price
DPO7054C 500 MHz 5 GS/s - 20 GS/s 25M points - 250M points 4 Configure & Quote
DPO7104C 1 GHz 5 GS/s - 20 GS/s 25M points - 250M points 4 Configure & Quote
DPO7254C 2.5 GHz 10 GS/s - 40 GS/s 25M points - 500M points 4 Configure & Quote
DPO7354C 3.5 GHz 10 GS/s - 40 GS/s 25M points - 500M points 4 Configure & Quote
ModelDPO7054C
Analog BandwidthSample RateRecord Length
500 MHz5 GS/s - 20 GS/s25M points - 250M points
Analog Channels
4
ModelDPO7104C
Analog BandwidthSample RateRecord Length
1 GHz5 GS/s - 20 GS/s25M points - 250M points
Analog Channels
4
ModelDPO7254C
Analog BandwidthSample RateRecord Length
2.5 GHz10 GS/s - 40 GS/s25M points - 500M points
Analog Channels
4
ModelDPO7354C
Analog BandwidthSample RateRecord Length
3.5 GHz10 GS/s - 40 GS/s25M points - 500M points
Analog Channels
4
 Tektronix
DPO7000C
Tektronix
MSO/DPO5000B
Keysight
S Series
LeCroy
HDO6000
Bandwidth500 MHz to 3.5 GHz350 MHz to 2 GHz500 MHz to 8 GHz350 MHz to 1 GHz
Analog Channels4444
Analog Sample Rate (All Channels)Up to 10 GS/sUp to 5 GS/sUp to 10 GS/sUp to 2.5 GS/s
Analog Sample Rate (1 Channel)Up to 40 GS/sUp to 10 GS/sUp to 20 GS/sUp to 2.5 GS/s
Maximum Optional Record Length (1 Channel)500 M250 M100 M250 M
Waveform Capture Rate (wfms/s)>310,000>250,000Not SpecifiedNot Specified
Operating SystemOpen WindowsOpen WindowsOpen WindowsOpen Windows

 

Automated power measurements

Thumbnail

Automated measurements and reporting ensure simple, repeatable power quality, switching loss, magnetic loss, harmonics measurements and more to meet the measurement demands of today’s efficient power converters. Plus, smart TekVPI current and differential probes reduce uncertainty and eliminate power measurement pitfalls.

Highlights

  • Opt. PWR: Advanced power measurement and analysis solution for characterization and testing of power devices and power supplies including power quality and harmonic testing
  • Opt. USBPWR: Automated compliance testing for USB power adapters to USB2.0 Battery Charger Specification v1.1 and IEC 62684

Automotive serial analysis and compliance testing

Thumbnail

Simplify automotive system design debug and verification with protocol decode and serial trigger options for CAN, LIN and FlexRay buses. Ensure interoperability of BroadR-Reach and MOST serial devices with automated compliance testing.

Highlights

  • Opt. SR-AUTO: CAN, LIN, and FlexRay protocol trigger and decode of serial packet content
  • Opt. BRR: BroadR-Reach/100BASE-T1 Automated Compliance Solution
  • Opt. MOST: Electrical compliance and debug test solution for MOST50 and MOST150 host and device designs

Embedded serial decoding and analysis

Thumbnail

Protocol decode, serial triggering, and analysis for I2C, SPI, RS-232/422/485/UART, USB 2.0, Ethernet, and MIL-STD-1553B simplify advanced system design debug and verification.

Highlights

  • Opt. SR-AERO MIL-STD-1553B protocol trigger and decode of serial packet content
  • Opt. SR-COMP RS-232/422/485/UART protocol trigger and decode of serial packet content
  • Opt. SR-DPHY MIPI® D-PHY automatic decode and search on serial packet content
  • Opt. SR-EMBD I2C and SPI protocol trigger and decode of serial packet content
  • Opt. SR-ENET 10BASE-T and 100BASE-TX protocol search and decode of serial packet content
  • Opt. SR-USB USB 2.0 low-speed, full-speed and high speed protocol trigger and decode of serial packet content

Serial compliance testing

Thumbnail

Ensure interoperability of USB 2.0 and Ethernet serial designs with automated compliance testing.

Highlights

  • Opt. ET3 Automated characterization, compliance and full PHY layer support for 10BASE-T, 100BASE-TX and 1000BASE-T
  • Opt. USB2 Perform "one touch" compliance testing with automated instrument and test mode control
  • Opt. HSIC Electrical signal quality test and protocol validation of HSIC host and device designs
  • Opt. DDRA Complete memory interface analysis package for DDR1/2/3/4, LPDDR1/2/3/4 and GDDR3/5

Advanced jitter and timing analysis

Thumbnail

With comprehensive jitter and eye-diagram analysis, plus decomposition algorithms, DPOJET simplifies discovering signal integrity concerns and jitter and their related sources in today's high-speed serial, digital and communication system designs.

Highlights

  • Characterize performance of high-speed serial and parallel bus designs
  • Characterize clock and data jitter/noise and signal integrity
  • Characterize modulation of spread spectrum clock circuits
  • Perform PHY testing of serial standards such as MIPI® D-PHY, DDR and MOST

Wideband RF analysis

Thumbnail

SignalVu RF and vector signal analysis software provides the functionality of a vector signal analyzer and spectrum analyzer, with the powerful trigger capabilities of a digital oscilloscope—all in a single package. Use SignalVu to easily validate wideband designs and characterize wideband spectral events.

Highlights

  • Opt. SVE: SignalVu Essentials provides wideband spectral analysis and measurements
  • Opt. SVA: SignalVu AM/FM/Direct audio measurements
  • Opt. SVM: SignalVu general-purpose modulation analysis
  • Opt. SVP: SignalVu advanced pulse signal analysis
  • Opt. SVT: SignalVu settling time measurements–frequency and phase
Data SheetSoftware Package / Software OptionDescriptionConfigure and Quote
TekScope Anywhere™

An offline waveform analysis tool that unchains your data from your scope and adds additional measurement capability.

Contact Us
Opt. BRR

BroadR-Reach/100BASE-T1 Automated Compliance Solution.

Contact Us
Opt. D-PHY

Verify to the MIPI D-PHY specification by rapidly characterizing and discovering sources of jitter and signal integrity concerns using the fully flexible and customizable test setup. Using DPOJET, Option D-PHY enables transmitter high-speed data-clock timing measurements, along with a full range of electrical characteristics in high-speed or low-power modes.

Contact Us
Opt. DDRA, LP-DDR4

Complete memory interface analysis package for DDR1/2/3/4, LPDDR1/2/3/4 and GDDR3/5. Option LP-DDR4 for LPDDR4 is available to use only on MSO/DPO70000 oscilloscopes.

Contact Us
Opt. DJA, DJAN

Simplifies identifying signal integrity concerns, jitter and their related sources and provides the highest sensitivity and accuracy available for real-time oscilloscopes.

Contact Us
Opt. ET3

Automated characterization, compliance and full PHY layer support for 10BASE-T, 100BASE-TX and 1000BASE-T.

Contact Us
Opt. HSIC

Electrical signal quality test and protocol validation of HSIC host and device designs.

Contact Us
Opt. MOST

Electrical compliance and debug test solution for MOST50 and MOST150 host and device designs.

Contact Us
Opt. MTM

Compliance verification and interoperability testing to communication and computing serial standards masks.

Contact Us
Opt. NBASET NBASE-T TekExpress Conformance and Debug Solution Contact Us
High Voltage Single Ended Probes
Datasheet LinkProbeDescriptionConfigure and Quote
P5100A

High Voltage Probe: 500 MHz, 100X, 2.5 kV, Single-ended, BNC

Configure & Quote
P6015A PROBE HIVOLTAGE; 75MHZ,40KV,1000X 10 FT - CERTIFICATE OF TRACEABLE CALIBRATION STANDARD Configure & Quote
Passive Probe
Datasheet LinkProbeDescriptionConfigure and Quote
P6101B Probe, Passive; 15 MHz, 1X Configure & Quote
P6139B

Passive Probe: 500 MHz, 10X, BNC

Configure & Quote
Low Voltage Single Ended Probes
Datasheet LinkProbeDescriptionConfigure and Quote
P6243 Active Probe: 1 GHz, 10X, Single-ended, TekProbe Configure & Quote
P6245 PROBE,FET ACT; >1.5GHZ,10X, Configure & Quote
TAP1500

Active Probe: 1.5 GHz, 10X, Single-ended, TekVPI

Configure & Quote
TAP2500 Active Probe: 2.5 GHz, 10X, Single-ended, TekVPI Configure & Quote
TAP3500

Active Probe: 3.5 GHz, 10X, Single-ended, TekVPI

Configure & Quote
Low Voltage Differential Probes
Datasheet LinkProbeDescriptionConfigure and Quote
P6247 PROBE,DIFF,ACT; 1GHZ BW,+/- 0.85/8.5V,1PF,TPI - CERTIFICATE OF TRACEABLE CALIBRATION STANDARD Configure & Quote
P6248 PROBE; 1.7GHZ DIFFERENTIAL - CERTIFICATE OF TRACEABLE CALIBRATION STANDARD Configure & Quote
TDP1500 Differential Probe: 1.5 GHz, 1X/10X, +/-8.5V, TekVPI Configure & Quote
TDP3500 Differential Probe: 3.5 GHz, 5X, +/- 2V, TekVPI Configure & Quote
Current Probe
Datasheet LinkProbeDescriptionConfigure and Quote
TCP0020

Probe, AC/DC Current; 20 Amp; 50 MHz BW; TekVPI Interface; Certificate of Traceable Calibration Standard

Configure & Quote
TCP0030A

Probe, AC/DC Current; 30 Amp DC, DC TO 120 MHZ; with TekVPI Interface; Certificate of Traceable Calibration Standard

Configure & Quote
TCP0150

Current Probe: 20 MHz, 5 mA to 212 A, AC/DC, TekVPI

Configure & Quote
TCP202A

Probe, AC/DC Current; DC coupled, 15 Amp Max DC; 50 MHz BW, TekProbe Lvl2 Interface; Certificate of Traceable Calibration Standard

Configure & Quote
High Voltage Differential Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TDP0500

Differential Probe: 500 MHz, 5X/50X, +/- 42V, TekVPI

Configure & Quote
TDP1000

Differential Probe: 1 GHz, 5X/50X, +/- 42V, TekVPI

Configure & Quote
THDP0100

Differential PROBE; 100 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE

Configure & Quote
THDP0200

Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE

Configure & Quote
TMDP0200

Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL MEDIUM VOLTAGE PROBE;TMPD0200

Configure & Quote
Isolated Measurement Systems
Datasheet LinkProbeDescriptionConfigure and Quote
TIVH08

Differential Probe; 800 MHZ, 1X/5X/10X/25X/50X/100X/250X/500X/1000X, +/- 1 kV, TekVPI, 3 Meter Cable

Configure & Quote
TIVH08L

Differential Probe; 800 MHZ, 1X/5X/10X/25X/50X/100X/250X/500X/1000X, +/- 1 kV, TekVPI, 10 Meter Cable

Configure & Quote
TIVM1

Differential Probe; 1 GHZ, 1X/5X/10X/20X/50X, +/- 50V, TekVPI, 3 Meter Cable

Configure & Quote
TIVM1L

Differential Probe; 1 GHZ, 1X/5X/10X/20X/50X, +/- 50V, TekVPI, 10 Meter Cable

Configure & Quote
TitleTypeDate
Difference between Position and Offset on an oscilloscope
To answer this first you need to understand the layout of how your waveform trace is displayed. On your oscilloscope you generally will see either 8 or 10 divisions vertically on the screen. Along the left side of the screen you will see a marker…
FAQ ID: 247211 16 Jan 2018
TDSET3 Ethernet Compliance SW DPO-MSO5000B, DPO7000C, DPO-DSA-MSO70000C Series and DPO-DSA-MSO-70000D-DX-SX - v3.2.10

With Ethernet Compliance Test Software, engineers validating their Ethernet physical layer can perform reliable compliance tests of 10BaseTe, 10BaseT, 100Base-TX, and 1000BaseT technologies in their labs. This application enhances efficiency with…
Part number: 066180101
Application 15 Jan 2018
Ethernet Transmitter Test Application Software (2.5GBASE-T, 5GBASE-T and 10GBASE-T) - v1.2.4

TekExpress Ethernet Transmitter Test Application performs all of the PMA electrical measurements as specified by the IEEE802.3, section 55, the IEEE P802.3bz, Section 16 , and the NBASE-T Spec Draft 2.3 specification. This allows you to quickly and…
Part number: 066196600
Application 15 Jan 2018
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4

Part number: 066093809
Utility 12 Jan 2018
Digital Phosphor Oscilloscopes
DPO7000 Series Datasheet
Tektronix understands that engineers rely on an oscilloscope throughout their design cycle, from prototype turn-on to production testing. The DPO7000 Series oscilloscopes' unique capabilities combined with exceptional signal acquisition performance…
Literature number: 48W-26543-19
Datasheet 10 Jan 2018
DPOJET
This document is a printable version of the online help. DPOJET is a jitter, timing, and eye diagram analysis tool for Tektronix Performance Digital…
Jitter, Noise and Eye Digram Analysis Tools
Part number: 077004822
User 03 Jan 2018
Best Practices when using a Tektronix High Performance Oscilloscopes
You can refer to our Best Practices guide at: Best Practices Included in the guide is information regarding the following subject areas: Preventing Electrostatic Dischage Signal Path Compenstation and instrument calibration Deskew of signal channels…
FAQ ID: 69171 31 Dec 2017
Debugging Serial Buses in Embedded System Designs

Learn the basics of the hardware protocols of the most common serial buses. Find out how to use the protocol trigger, decode and search capabilities of oscilloscopes to solve serial bus integration and debug challenges.
Literature number: 48W-19040-21
Application Note 24 Dec 2017
Power Supply Measurement and Analysis with DPOPWR Application Software

Discover how to make many common power measurements with Tektronix oscilloscopes and the DPOPWR power analysis software.  Included is useful information on probing, and characterizing power supplies and measuring switching loss, safe operating area…
Literature number: 54W-23880-4
Application Note 20 Dec 2017
Deployment Package for DPO5000/B, MSO5000/B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX) - V10.8.1

Deployment Package for DPO5000/B, MSO5000/B, DPO7000C, DPO70000C, DSA70000C, MSO70000C, DPO70000D, DSA70000D, DPO70000DX, MSO70000DX, DPO70000SX (Not Compatible with DPO77002SX). It contains the TekScope Firmware and compatible application software…
Part number: 066141829
Firmware 20 Dec 2017
Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top