6 Series MSO Mixed Signal Oscilloscope

6 Series MSO Mixed Signal Oscilloscope

Troubleshoot and validate high-speed designs now and into the future with upgradeable bandwidth that starts at 1 GHz and goes up to 8 GHz . Get accurate measurements with low noise and 25 GS/s sample rate per channel -- sample rate does not drop as you turn on channels.  See all oscilloscopes »

Bandwidth

Up to 8 GHz

Sample Rate

25 GS/s per channel

Record Length

Up to 250 Mpoints

Vertical Resolution

12 bits

Lowest noise at high sensitivity

>75% reduction in noise from a typical oscilloscope at 1mV/div

See signals you couldn't see before.

  • Lowest input noise enabled by new TEK061 front-end ASICs.
  • 12-bit resolution at 4 GHz, and up to 16-bit resolution at 200 MHz
Thumbnail Watch the science behind the low noise

Advanced measurements and analysis made easy

6 series - Jitter Analysis Configuration
6 series - power quality
6 series - high speed serial
6 series - four channels

Characterize jitter on GHz clocks and serial buses with ease. Effortlessly bring statistics into your everyday toolkit with integrated advanced measurements. For example, use the same drag and drop action for jitter or advanced power analysis as routine rise time and rms measurements.

  • Advanced Jitter Analysis
  • Advanced Power Analysis
  • Power Rail Measurements
  • Memory Analysis and Debug
  • High-speed Serial Compliance
  • Automated Measurements and Trend Analysis
  • Spectrum View frequency domain display

Signal fidelity starts with probes

6-signal-fidelity-rev1.png

Enter a world of versatility with four FlexChannel® inputs. Browse your circuits with included 1 GHz, 10x probes. Connect high performance single-ended active probes or differential probes, or do both at once with new TriMode probes. Expand your view by connecting a TLP058 probe to any input and get 8 digital channels - up to 32 digital channels.

  • 1 MΩ and 50 Ω input terminations
  • Four 1 GHz low-loading passive probes, included
  • New TDP7700 Series 4, 6 and 8 GHz Trimode probes
  • New TAP4000 & TDP4000 4 GHz single-ended & differential probes

FlexChannel Input

1 high resolution analog input

8 digital logic inputs per channel

Touchscreen that works

  • 15.6 inch, ultra-responsive touchscreen
  • Pinch/zoom/swipe
  • Button and mouse operation

Confidence in numbers

Input Channels
4 FlexChannel inputs.
Each FlexChannel provides 1 analog signal input or 8 digital logic inputs with TLP058 probe

Bandwidth 1
1, 2.5, 4, 6, or 8 GHz

Sample Rate
25 GS/s on all analog/digital channels

Record Length 1
Up to 250 Mpoints on all analog/digital channels

Signal Generator 1
Arbitrary, Sine, Square, Pulse, Ramp, Triangle, DC Level, Gaussian, Lorentz, Exponential Rise/Fall, Sin(x)/x, Random Noise, Haversine, Cardiac

Digital Voltmeter 2
4 digit

Trigger Frequency Counter 2
8 digit

Display
15.6-inch (385 mm)
TFT color HD (1920 x 1080) resolution Capacitive (multi-touch) touchscreen

1 - Optional and upgradeable
2 - Free with product registration

Add functionality or performance as your needs change

  • Add Bandwidth up to 8 GHz
  • Increase Record Length up to 250 Mpoints on each channel
  • Add Logic Probes for up to 32 Digital Channels
  • Add Windows 10 Operating System
  • Add an Arbitrary / Function Generator
  • Add advanced analysis: serial decode/trigger, power, jitter,
    memory analysis and debug, and automated compliance testing

New features and options make the best scopes better

NEW Options

Free upgrades on instruments with advanced analysis options

Free upgrade on all instruments

  • Save measurement trends as CSV files for reports or analysis
  • Choose to display cursor readouts at cursors or in the results bar
  • User interface in 11 languages
  • Embedded help in English, Japanese, or Simplified Chinese

Already have a 6 Series? Get your update.

Download new firmware

What's in the box?

  • 4 TPP1000 1 GHz, low-C passive probes
  • 1-year warranty on the included probes
  • 3-year warranty on the instrument
  • Mouse, power cord and front cover with attached accessory pouch
  • Printed Installation Manual covers safety and basic operation
  • Comprehensive Integrated Online Help
  • Certificate of traceability
Configure & Quote

Models

Model Analog Bandwidth Sample Rate Record Length Analog Channels Digital Channels Function Generator Output List Price
MSO64

1 GHz - 8 GHz

25 GS/s

62.5 - 250 Mpoints

4

Up to 32 (optional)

1 (optional)

-
Configure & Quote
Model MSO64
Analog BandwidthSample RateRecord Length

1 GHz - 8 GHz

25 GS/s

62.5 - 250 Mpoints

Analog ChannelsDigital ChannelsFunction Generator Output

4

Up to 32 (optional)

1 (optional)

Model Analog Bandwidth Sample Rate Record Length Analog Channels Digital Channels Function Generator Output List Price
MSO64

1 GHz - 8 GHz

25 GS/s

62.5 - 250 Mpoints

4

Up to 32 (optional)

1 (optional)

-
Configure & Quote
Model MSO64
Analog BandwidthSample RateRecord Length

1 GHz - 8 GHz

25 GS/s

62.5 - 250 Mpoints

Analog ChannelsDigital ChannelsFunction Generator Output

4

Up to 32 (optional)

1 (optional)

  Tektronix
6 Series MSO
Tektronix
5 Series MSO
Keysight
S-Series
Rohde & Schwarz
RTP Series
Rohde & Schwarz
RTO Series
LeCroy
WavePro HD
Detailed Comparison -- -- Fact Sheet Fact Sheet Fact Sheet Fact Sheet
Bandwidth Ranges 1 GHz to 8 GHz 350 MHz to 2 GHz 500 MHz to 8 GHz 4 GHz to 8 GHz 600 MHz to 6 GHz 2.5 GHz to 8 GHz
Bandwidth (on four channels) 8 GHz 2 GHz 4 GHz 8 GHz 4 GHz 4 GHz
Upgradeable Bandwidth Yes Yes Yes Yes Yes No
Number of Analog Channels 4 4, 6, or 8 4 4 2 or 4 4
Channel Input Impedance 50 Ω, 1 MΩ 50 Ω, 1 MΩ 50 Ω, 1 MΩ 50 Ω 50 Ω, 1 MΩ 50 Ω, 1 MΩ
Analog Sample Rate (on four Channels) Up to 25 GS/s Up to 6.25 GS/s Up to 10 GS/s Up to 20 GS/s Up to 20 GS/s Up to 10 GS/s
Standard Record Length (on four Channels) 62.5 Mpts 62.5 Mpts 100 Mpts 50 Mpts 50 Mpts 50 Mpts
Integrated Arbitrary/Function Generator 50 MHz (opt) 50 MHz (opt) None None 100 MHz (opt.) None
Digital / Logic Analysis Channels (MSO) Up to 32 (opt) Up to 64 (opt) 16 (opt.) 16 (opt.) 16 (opt.) 16 (opt)
Waveform Capture Rate (wfms / Sec) >500,000 >500,000 >1,100 950,000 >1,000,000 Not Available
RMS Noise, 1mV/div, at 1 GHz, 4GHz, 8GHz 60 µV, 97 µV, 169 µV 254 µV, NA, NA 90 µV, 153 µV, 260 µV NA, 270 µV, 430 µV 100 µV, 240 µV, NA NA, 228 µV, 315 µV
ADC Resolution 12 bits 12 bits 10 bits 8 bits 8 bits 12 bits
Operating System Embedded OS
Windows 10 (opt)
Embedded OS
Windows 10 (opt)
Windows 10 Windows 10 Windows 7 Windows 10
Standard Probes 1 GHz Passive
3.9 pF loading
Up to 1 GHz Passive
3.9 pF loading
500 MHz Passive
9.5 pF loading
None 500 MHz Passive
10 pF loading
500 MHz Passive
10 pF loading
Standard Warranty 3 years 3 years 1 years 3 years 3 years 3 years

Power Supply Analysis

MSO64-front-application

Make reliable, repeatable power quality, harmonics, switching loss, safe operating area measurements and more, with the automated power measurement and analysis. Save time with SPMI decoding and triggering. And rely on the 6 Series MSO low-noise performance for accurate evaluations of power supply noise.

Highlights

  • Power quality and harmonics
  • Switching loss and safe operating area
  • In-circuit inductor and transformer analysis
  • SPMI power management bus decoding and triggering

Jitter Analysis

6 series - Jitter Analysis Configuration

Clocks are the heart of every embedded system and digital communication link. Jitter and other clock distortion can impact system operation, and getting to the root cause can be challenging without the right analysis tools.

Highlights

  • Standard phase noise, TIE, and frequency plots and histograms
  • Optional advanced analysis with jitter decomposition and clock recovery

Serial Standards Compliance Testing

MSO64-with-monitor

Systems depend on fast, reliable data transfer. And high speed digital standards rely on rigorous test procedures to ensure that reliability. Automated compliance testing software manages the whole testing process with the 6 Series MSO -- setup, making measurements, checking against standard limits, and generating thorough reports.

Highlights

  • Ethernet 10/100/1000BASE-T
  • Ethernet XGBT Compliance
  • Ethernet NBASE-T Compliance
  • USB 2.0
  • MIPI D-PHY 1.2
  • Automotive Ethernet 100/1000BASE-T1

Power Integrity

6 series - power integrity

Today’s boards can have 20 or more power rails. Most of these are less than a few volts and have strict noise limits. Accurate measurements demand special attention.

Highlights

  • Digital Power Management option automates ripple and turn-on/off measurements
  • Compatible with low-noise TPR Series power-rail probes
  • Low measurement system noise
Data SheetSoftware Package / Software OptionDescriptionConfigure and Quote
Opt. 6-AUTOEN-BND

Automotive Ethernet Compliance, Signal Separation, PAM3 Analysis, 100BASE-T1 Decode software

Contact Us
Opt. 6-SV-RFVT

Spectrum View RF versus Time Analysis

Contact Us
Opt. 6-AFG

Add built-in Arbitrary/Function Generator

Contact Us
Opt. 6-AUTOEN-SS

Automotive Ethernet Signal Separation

Contact Us
Opt. 6-CMAUTOEN

Automotive Ethernet (100Base-T1, 1000Base-T1) automated compliance test application

Contact Us
Opt. 6-CMDDR3

DDR3/LPDDR3 Compliance Test

Contact Us
Opt. 6-CMDPHY

MIPI D-PHY 1.2 compliance test solution

Contact Us
Opt. 6-CMENET

Ethernet (10/100/1000BASE-T) compliance test solution

Contact Us
Opt. 6-CMINDUEN10

Industrial Ethernet (10Base-T1L Long reach) automated compliance test solution

Contact Us
Opt. 6-CMNBASET

Ethernet (2.5/5GBASE-T) compliance test solution

Contact Us

Access Digital Channels

Upgrade Description Purchasing Details
TLP058 Logic Probe Each probe accesses 8 digital channels on any FlexChannel input Request a quote on this probe

Add Instrument Functions

Upgrade Description Purchasing Details
SUP6-AFG Add arbitrary function generator Request trial license

Request a quote
SUP6-DVM Add digital voltmeter / trigger frequency counter Software upgrade license file provided upon registration.
Register now.
SUP6-RL-1 Extend record length to 125 Mpts / channel Request trial license

Request a quote
SUP6-RL-1T2 Extent record length from 125 Mpts/channel to 250 Mpts/channel Request trial license

Request a quote
SUP6-RL-2 Extend record length to 250 Mpts / channel Request trial license

Request a quote
SUP6-WIN Add removable solid state drive with Windows 10 license installed. No trial available

Request a quote

Add Protocol Analysis

Upgrade Description Purchasing Details
SUP6-DBLVDS Automated LVDS test solution for 6 Series MSO oscilloscopes Request trial license

Request a quote
SUP6-SRAERO Aerospace serial triggering and analysis (MIL-STD-1553, ARINC429) Request trial license

Request a quote
SUP6-SRAUDIO Audio serial triggering and analysis (I 2S, LJ, RJ, TDM) Request trial license

Request a quote
SUP6-SRAUTO Automotive serial triggering and analysis (CAN, CAN FD, LIN, FlexRay) Request trial license

Request a quote
SUP6-SRAUTOEN1 100BASE-T1 automotive Ethernet protocol decode software Request trial license

Request a quote
SUP6-SRAUTOSEN Automotive sensor serial triggering and analysis (SENT) Request trial license

Request a quote
SUP6-SRCOMP Computer serial  triggering and analysis (RS-232/422/485/UART) Request trial license

Request a quote
SUP6-SREMBD Embedded serial triggering and analysis (I 2C, SPI) Request trial license

Request a quote
SUP6-SRENET Ethernet serial triggering and analysis (10Base-T, 100Base-TX) Request trial license

Request a quote
SUP6-SRI3C MIPI I3C decoding and analysis Request trial license

Request a quote
SUP6-SRPM Power Management serial triggering and analysis (SPMI) Request trial license

Request a quote
SUP6-SRSPACEWIRE SpaceWire protocol decoding and analysis Request trial license

Request a quote
SUP6-SRUSB2 USB 2.0 serial bus triggering and analysis (LS, FS, HS) (≥ 1 GHz model recommended for HS) Request trial license

Request a quote

Add Serial Compliance Testing

Upgrade Description Purchasing Details
SUP6-AUTOEN-BND Automotive Ethernet Compliance, Signal Separation, PAM3 Analysis, 100BASE-T1 Decode software Request trial license

Request a quote
SUP6-AUTOEN-SS Signal Separation Solution (Min BW 1 GHz) using TekExpress Automation Platform Request trial license

Request a quote
SUP6-CMINDUEN10 Industrial Ethernet (10Base-T1L Long reach) automated compliance test solution Request trial license

Request a quote
SUP6-PAM3 PAM3 Automated Compliance Solution (Min BW 1 GHz) using TekExpress Automation Platform Request trial license

Request a quote
SUP6-CMAUTOEN Automotive Ethernet (100Base-T1 and 1000BASE-T1) automated compliance test solution Request trial license

Request a quote
SUP6-CMUSB2 USB 2.0 automated pre-compliance test solution Request trial license

Request a quote
SUP6-CMENET Ethernet (10/100/1000BASE-T) compliance test solution Request trial license

Request a quote
SUP6-CMDPHY MIPI D-PHY 1.2 compliance test solution Request trial license

Request a quote
SUP6-CMNBASET Ethernet (2.5/5GBASE-T) compliance test solution Request trial license

Request a quote
SUP6-CMXGBT Ethernet (10GBASE-T) compliance test solution Request trial license

Request a quote

Add Advanced Analysis

Upgrade Description Purchasing Details
SUP6-SV-RFVT Spectrum View RF versus Time Analysis Request trial license

Request a quote
SUP6-SV-BW-1 Increase Spectrum View Capture Bandwidth to 2 GHz Request trial license

Request a quote
SUP6-DJA Advanced jitter and eye analysis Request trial license

Request a quote
SUP6-PWR Power analysis Request trial license

Request a quote
SUP6-DPM Digital Power Management Request trial license

Request a quote

Upgrade Bandwidth

Upgrade Description Purchasing Details
SUP6-BWxTy4 MSO64 bandwidth upgrade from x to y, where x and y are the hundreds of MHz  

Add Memory Debug and Compliance

Upgrade Description Purchasing Details
SUP6-DBDDR3 DDR3 memory debug solution Request trial license

Request a quote
SUP6-CMDDR3 DDR3 / LPDDR3 Compliance Test Request trial license

Request a quote
Low Voltage Single Ended Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TAP1500 Active Probe: 1.5 GHz, 10X, Single-ended, TekVPI Configure & Quote
TAP2500

Active Probe: 2.5 GHz, 10X, Single-ended, TekVPI

Configure & Quote
TAP3500

Active Probe: 3.5 GHz, 10X, Single-ended, TekVPI

Configure & Quote
TAP4000

4 GHz, Single Ended Probe with TekVPI interface

Configure & Quote
Current Probe
Datasheet LinkProbeDescriptionConfigure and Quote
TCP0020 Probe, AC/DC Current; 20 Amp; 50 MHz BW; TekVPI Interface; Certificate of Traceable Calibration Standard Configure & Quote
TCP0150 Current Probe: 20 MHz, 5 mA to 212 A, AC/DC, TekVPI Configure & Quote
TCP312A

Probe, AC/DC Current; 30 Amp DC, DC-100MHZ, Certificate of Traceable Calibration Standard

Configure & Quote
TCPA300 Current Probe: 100 MHz, Amplifier (Requires Probe) Configure & Quote
High Voltage Differential Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TDP0500

Differential Probe: 500 MHz, 5X/50X, +/- 42V, TekVPI

Configure & Quote
TDP1000 Differential Probe: 1 GHz, 5X/50X, +/- 42V, TekVPI Configure & Quote
THDP0100 Differential PROBE; 100 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE Configure & Quote
THDP0200 Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE Configure & Quote
TMDP0200 Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL MEDIUM VOLTAGE PROBE;TMPD0200 Configure & Quote
Low Voltage Differential Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TDP1500

Differential Probe: 1.5 GHz, 1X/10X, +/-8.5V, TekVPI

Configure & Quote
TDP3500

Differential Probe: 3.5 GHz, 5X, +/- 2V, TekVPI

Configure & Quote
TDP4000

4 GHz, Differential Probe with TekVPI interface

Configure & Quote
TDP7704

4 GHz, TriMode Probe with TekFlex connector, TekVPI+ interface

Configure & Quote
TDP7706

6 GHz, TriMode Probe with TekFlex connector, TekVPI+ interface

Configure & Quote
TDP7708

8 GHz, TriMode Probe with TekFlex connector, TekVPI+ interface

Configure & Quote
Isolated Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TIVH02

IsoVu optically isolated differential probe, 200 MHz, TekVPI, 3 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips

Configure & Quote
TIVH02L

IsoVu optically isolated differential probe, 200 MHz, TekVPI, 10 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips

Configure & Quote
TIVH05

IsoVu optically isolated differential probe, 500 MHz, TekVPI, 3 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips

Configure & Quote
TIVH05L

IsoVu optically isolated differential probe, 500 MHz, TekVPI, 10 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips

Configure & Quote
TIVH08

IsoVu optically isolated differential probe, 800 MHz, TekVPI, 3 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips

Configure & Quote
TIVH08L

IsoVu optically isolated differential probe, 800 MHz, TekVPI, 10 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips

Configure & Quote
TIVM1

IsoVu optically isolated differential probe, 1 GHz, TekVPI, 3 m cable, includes 5X(IVTIP5X) and 25X(IVTIP25X) tips

Configure & Quote
TIVM1L

IsoVu optically isolated differential probe, 1 GHz, TekVPI, 10 m cable, includes 5X(IVTIP5X) and 25X(IVTIP25X) tips

Configure & Quote
Logic Analyzer Probe
Datasheet LinkProbeDescriptionConfigure and Quote
TLP058 8 channel general purpose logic probe for 5 and 6 Series MSO oscilloscopes. Includes accessory kit. Configure & Quote
Passive Probe
Datasheet LinkProbeDescriptionConfigure and Quote
TPP0502 Passive Probe: 500 MHz, 2X, TekVPI Configure & Quote
TPP1000 Passive Probe: 1 GHz, 10X, TekVPI Configure & Quote
High Voltage Single Ended Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TPP0850 High Voltage Probe: 800 MHz, 50X, 2.5 kV, Single-ended, TekVPI Configure & Quote
Power Rail Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TPR1000

1 GHz, Single-Ended TekVPI Power-Rail Probe with TPR4KIT Standard Accessory Kit

Configure & Quote
TPR4000

4 GHz, Single-Ended TekVPI Power-Rail Probe with TPR4KIT Standard Accessory Kit

Configure & Quote
Data SheetAccessoryDescription
HC5 Hard transit case for the 5 and 6 Series MSO
RM5 Rackmount kit for the 5 and 6 Series MSO
SUP6-WIN

Removable SSD with Windows license on 6 Series oscilloscopes

Make extremely accurate power rail measurements using two Tektronix power rail probes, a Keithley DMM6500 touchscreen Digital Multimeter, and ultra-low-noise 6 Series mixed signal oscilloscope. Watch…
0h 1m 46s
Learn how to get optimal results from your power supply design by checking the power supply rejection ratio. This video covers how DC-DC  converters or low voltage drop-out regulators (LDOs), reject…
0h 3m 44s
Automotive Ethernet with PAM3 introduces new test challenges. Tektronix' new, innovative, non-intrusive Signal Separation simplifies Automotive Ethernet testing and set-up, providing advanced signal…
0h 8m 3s
Are you seeing ALL the noise from your power rails? Lee Morgan, Technical Marketing Manager in EMEA, demos one of our power integrity setups with a 6 Series MSO, our new Power Rail Probes, and an…
0h 1m 27s
If you're doing mixed frequency/time domain work, Spectrum View makes it easy. Learn how to set up 5 and 6 Series MSOs to display synchronized time and frequency domain views on multiple channels,…
0h 6m 0s
How independent time and frequency controls beat traditional FFTs.
0h 6m 19s
See the ultra-low noise performance of the TPR4000 Power Rail Probe, and how it can be used for measuring DC power rail noise in microvolts, especially when paired with the 6 Series MSO oscilloscope.
0h 6m 15s
Learn how 5 and 6 Series MSO Mixed-Signal Oscilloscopes and the optional embedded serial bus analysis software provide unparalleled system visibility by decoding MIL-STD 1553 messages, triggering on…
0h 3m 14s
This demonstration shows the setup of an oscilloscope-based test system, and performance of the Power Spectral Density test specified by the standards.
0h 4m 52s
Learn how to quickly capture bursts just by drawing a couple of boxes, and how to apply logic and add more shapes to capture increasingly complex waveforms.
0h 4m 5s
Windows 10 version
No, but there is no need to.  The Windows build on Tektronix scopes is from the Long-Term Servicing Channel (LTSC).  Unlike normal releases of version 1607, this release still receives security updates and support from Microsoft, and will continue to do…
FAQ ID: 780986 02 Oct 2019
TekExpress Ethernet Compliance Solution TekExpress Ethernet Compliance Solution
This document contains operation information for the TekExpress Ethernet Tx Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software.
Part number: 077150403
Primary User
TekExpress Ethernet Compliance Solution for DPO5000/7000/70000 oscilloscopes TekExpress Ethernet Compliance Solution for…The application provides more visibility into your Ethernet designs with 1000BASE-T/100BASE-TX/10BASE-T PHY measurements as outlined in IEEE 802.3 Section 40, ANSI X3.263, and IEEE 802.3 Section 14 specific measurements for different Ethernet standards to…
Part number: 077163501
User
TekExpress Ethernet (1000BASE-T,100BASE-TX and 10BASE-T) Compliance Solution - 5 and 6 Series MSO - V1.2.1
With TekExpress Ethernet Compliance Test Software, engineers validating an Ethernet physical layer can perform reliable compliance tests of 10Base-T, 100Base-TX and 1000Base-T technologies in their labs. This application enhances efficiency with faster…
Part number: 066196755
Application
Physical Layer Compliance Testing for 1000BASE-T Ethernet
Ethernet compliance testing requires precise test setups and evaluation against limits dictated by IEEE 802.3 standards.  Automated testing software for oscilloscopes greatly simplifies and speeds testing.  This application note summarizes key tests…
Literature number: 48W-61620-0
Application Note 25 Sep 2019
6 Series MSO Specifications and Performance Verification
Revision A. For firmware version 1.0 and above. This document contains the specifications and performance verification procedures for the 6 Series MSO instruments.
Part number: 077146103
Performance Verification
Tektronix TekExpress LVDS Automated test solution on the 5/6 Series MSO V1.0.0.
The Tektronix TekExpress LVDS transmitter test application offers a physical layer test solution for transmitter parameter measurements and characterization.
Part number: 066170911
Application
Measuring Power Supply Switching Loss with an Oscilloscope
This application note explains how to measure switching loss and conduction loss in power supply switches using an oscilloscope equipped with a current probe and differential voltage probe. It covers both manual and automated techniques, along with…
Literature number: 46W-60010-3
Application Note 17 Sep 2019
4, 5 and 6 Series MSO, 5 and 6 Series Low Profile Digitizers IVI-COM Driver - V1.6.0
TekSeriesScope IVI-COM Driver for 4, 5 and 6 Series Mixed Signal Oscilloscopes; 5 and 6 Series Low Profile Digitizers IVI Scope class-compliant driver. It complies with Scope Class specifications (IVI-4.1) as defined by the IVI foundation. An IVI class-…
Part number: 066192807
Driver
Spectrum View: A New Approach to Frequency Domain Analysis on Oscilloscopes
Spectrum View is a new way of performing spectrum analysis on an oscilloscope. This application note shows and explains how Spectrum View operates and how it differs from traditional oscilloscope FFT functions.
Literature number: 48W-61563-1
Application Note 13 Sep 2019
Automotive Ethernet: See the True Signal
As the move toward Automotive Ethernet technology in vehicles accelerates, comprehensive design validation is vital to ensure interoperability and reliable operation across multiple ECUs. This application note provides information on Automotive Ethernet,…
Literature number: 48W-61604-0
Application Note 09 Sep 2019
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, LPD64) Programmer Manual
This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64, and LPD64 instruments. Supports firmware version 1.20.x.
Part number: 077130508
Programmer
Error message “CvP Tester Didn’t Run” on my 5 Series MSO.
Instruments that have both a Linux drive and a Windows drive should have the same firmware revision on both drives. When only one drive has the latest firmware installed, the instrument user may find that firmware is not updated on the Linux drive once…
FAQ ID: 771991 30 Aug 2019
Ensuring the Performance and Conformance of In-Vehicle Networks for New-Generation Automobiles
Automotive Primer: In-Vehicle NetworkingThis primer provides an overview of the trends, challenges and solutions associated with the expected future evolution of in-vehicle networks, as well as a foundation for testing in-vehicle networks to accelerate new designs to production, streamline…
Literature number: 48W-61611-0
Primer 30 Aug 2019
6 Series MSO
Mixed Signal Oscilloscope Datasheet With the lowest input noise and up to 8 GHz analog bandwidth, the 6 Series MSO provides the best signal fidelity for analyzing and debugging today's embedded systems with GHz clock and bus speeds. The remarkably innovative pinch-swipe-zoom touchscreen…
Literature number: 48W-61353-10
Datasheet
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix.
Literature number: 46W-31080-5
Selection Guide 29 Aug 2019
TEKVISA Connectivity Software - V4.2.0
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol.When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various…
Part number: 066093812
Driver
TekExpress Automotive Ethernet (100BASE-T1/1000BASE-T1) Automated Compliance Solution - MSO5 and MSO6 series - V1.2.5
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical test specification as per Open Alliance. The…
Part number: 066186012
Application
TekExpress Ethernet NBASE-T Compliance Solution TekExpress Ethernet NBASE-T Compliance Solution
This document contains operation information for the TekExpress Ethernet NBASE-T Compliance Solution. It is a PDF version of the help system accessible in the TekExpress software.
Part number: 077152000
Primary User
4, 5, 6 Series MSO (MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP, MSO64) Programmer Manual
Revision A: This document describes the remote access programming commands for the MSO44, MSO46, MSO54, MSO56, MSO58, MSO58LP and MSO64 instruments. Supports firmware version 1.16.x.
Part number: 077130507
Programmer
Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top