HDMI

High-Definition Multimedia Interface (HDMI) is the digital video interface for delivering a HD experience. As transmission speeds of the HDMI standard increase, interoperability issues due to signal quality distortions introduce new technical requirements and test challenges for HDMI sink and source devices.

Including HDMI 2.1 support, Tektronix testing solutions provide advanced signal capture and analysis, with automated test capabilities to accelerate testing and product development cycles. Testing support includes:

  • HDMI Source Test
  • HDMI Sink Test
  • HDMI 2.1 eARC
High-Definition-Multimedia-Interface

HDMI Source Testing

HDMI standards continue to evolve to deliver high quality video and audio. With each successive generation, HDMI source developers face faster data rates and new test challenges. HDMI 2.1 increases data rates up to 48 Gbps (Giga bits per second) over 4 lanes, expanding test cases and test times. Differential, eye diagram and single-ended measurements require high signal integrity with the lowest noise to accurately measure device performance.

For HDMI source testing, Tektronix offers two source test configurations to best meet your needs. The TekExpress based software solution completely automates execution of all source measurements. With no connection changes or manual interventions required between tests, Tektronix’ source test solution provides simple set-up, ease of use, measurement accuracy and reduced test times.

Good probing techniques

Source test setup with stack configuration

HDMI Sink Testing

Measuring stability margins

Connection schematic for sink test setup including the Tektronix AWG-HD test fixture.

Sink testing requires a source capable of generating a wide range of test patterns and the ability to add precise amounts of impairment to the output signal. Jitter, tolerance, skew, sensitivity and timing testing with repeatability are critical. New standards increase data rates per lane and test time.

For customers looking to reduce test times with the performance to meet new standard requirements, Tektronix offers a complete test solution for HDMI sink testing. Featuring the performance Tektronix AWG70001B and the new AWG-HD test fixture, the solution provides a complete solution without the need for external delay lines, amplifiers or bias-Tees. TekExpress based software solution completely automates execution of all sink measurements. Once the set-up is connected, no changes or manual interventions are required between tests. Tektronix sink test provides an end-to-end automated solution with significant reductions in test time.

HDMI 2.1 eARC Testing

Enhanced Audio Return Channel (eARC) is a new feature in HDMI 2.1 which simplifies audio connectivity and supports the most advanced audio formats and highest audio quality. eARC improves the differential audio information over single ended signaling and utilizes the IEC61937 specification. To test for eARC compliance, developers need an affordable, easy-to-use, comprehensive and fast measurement solution.

Tektronix offers complete Compliance test solutions for both eARC Tx and eARC Rx. Tektronix eARC solutions are supported on the Tektronix DPO/DSA/MSO - 7000/70000/C/D/DX/SX series with bandwidth greater than or equal to 2.5GHz. The solution uses the Tektronix AWG5200 to streamline eARC Tx and Rx testing. TekExpress based software completely automates execution of all eARC Tx and eARC Rx compliance measurements providing simple set-up, ease of use and fast, efficient testing.

Good probing techniques

Test configuration with the Tektronix AWG5200 to streamline eARC Tx and Rx testing

Call us at 1-800-833-9200 or try Live Chat
To get started configuring your solution,
Add to Selection

Print configuration

Email configuration

Request a Quote

Enter email:

Send

Please enter a valid email address.

Your email has been sent.

Your quote has been requested.

  • Reset

Library

Title
The Basics of Serial Data Compliance and Validation Measurements

This primer is designed to help you understand the common aspects of serial data transmission & to explain the analog and digital measurement requirements that apply to these emerging serial technologies

Physical Layer Compliance Testing for HDMI Using TDSHT3 HDMI Compliance Test Software Application Note

This application note describes various tests that ensure validation, the challenges faced while testing complex HDMI signals and how oscilloscope-resident test software enables reliable results and automation to perform a wide range of tests.

Direct Synthesis Comes to the Aid of Serial Measurements

An analog approach to revolutionize serial data receiver measurement methodologies.

Title
Advantages of Stress Testing Receivers with Synthesized Waveforms Webinar

Advantages of Stress Testing Receivers with Synthesized Waveforms Webinar

Title
HEAC Cable TestsHEAC Cable Assembly Test Procedures
HDMI Sink Impedance MeasurementDifferential Impedance Measurement Procedures
HDMI/DVI Method Of Implementation (MOI)

Procedures Guide for HDMI Sink Instruments Differential Impedance Measurements using the Tektronix TDS/DSA8200 and Sampling Module 80E04

HEAC Utility Line Impedance Test

Utility Line Impedance Test Procedures

Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top