UK
Current Site
×
UK

Select Region to customize your experience:

Toggle Menu
UK
Current Site
×
UK

Select Region to customize your experience:

Contact us

Live Chat with Tek representatives. Available 9:00 AM - 5:00 PM

Call

Call us at

Available 9:00 AM – 17:00 PM CET Business Days

Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE
MODEL or KEYWORD

DC I-V Characterization of FET-Based Biosensors Using the 4200A-SCS Parameter Analyzer


Research and development of FET-based biosensors have increased because of their low cost, rapid response, and accurate detection. A bioFET converts a biological response to an analyte into an electrical signal that can easily by measured by DC I-V instrumentation. This application note describes typical bioFETs, explains how the source measure units (SMUs) in the 4200A-SCS Parameter Analyzer are used to perform the I-V characterization of bioFETs, defines common DC I-V tests and the instruments used to make the measurements, and explains measurement considerations for optimal results.