The products on this datasheet are no longer being sold by Tektronix.
Contact Technical Support for alternative products
View Tektronix Encore for used test equipment
Check support and warranty status for these products
Find more support information for these products
Supports 8 and 16-bit RapidIO rates up to 1 Gb/s
Real-time triggering on symbols, packets, and transactions
Predefined templates for common triggering events in real time
Power Trigger interface supports custom trigger definition for advanced applications
Simultaneous transmit and receive bus capture in one module
Decode and display for RapidIO symbols and packets
Automated linking of transaction-level and operation-level bus activity between transmit and receive bus
MagniVuTM provides a waveform timing view with 125 ps between samples
Analog mux allows the use of an external oscilloscope to view the analog features of the bus acquired by the P6880 differential probes
Automatic setup-and-hold adjustment
Minimum System and Probe Requirements
The TMS805 support package allows a choice of required minimum module configurations.
8-bit or 16-bit RapidIO ports - One 34 channel TLA7Axx acquisition module at 450 MHz state speed is required per RapidIO port (transmit and receive). In this configuration, the real-time filtering of idle control symbols is not available
8-bit or 16-bit RapidIO port - For real-time filtering of idle symbols, one 136 channel TLA7Axx acquisition module at 450 MHz state speed is required per RapidIO port (transmit and receive) when the transmit and receive clocks are unique. For systems with a common clock between the transmit and receive ports, a single 136 channel TLA7Axx acquisition module at 450MHz state speed may be used to capture both the transmit and receive ports.