Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE
MODEL or KEYWORD

Feedback

Real-Time Spectrum Analyzers

RSA3300A Series

The products on this datasheet are no longer being sold by Tektronix.
View Tektronix Encore for reconditioned test equipment.
Check support and warranty status for these products.

RSA3300A Series

Features & Benefits

    • Real-Time Spectrum Analysis Provides Seamless Capture of Time-varying, Transient or Periodic RF Signals not Possible with Swept Spectrum Analyzers
    • Up to 65.536 Ms (256MB) of Internal Memory Provides for Complete Analysis of Signals Over Time Without Making Multiple Measurements
    • Time-correlated, Simultaneous Views of Time, Frequency, and Modulation Domains Provide Greater and Unique Understanding of Signal Behavior
    • Spectrogram Provides a Revealing Picture of RF Signal Frequency and Amplitude Behavior Over Time – Not Possible with a Swept Spectrum Analyzer
    • Frequency Mask Trigger – Available only from Tektronix – Makes it Easy to Capture Fast, Transient, or Intermittent Signals that Swept Spectrum Analyzers Would Miss
    • Spectrum Analyzer Mode for Very Wide Span Analyses
    • Built-in Demodulators Enhance Analysis of AM, ASK, FM, FSK, and PM Signals
    • Digital Demodulator Offers Affordable Vector Signal Analysis
    • Outstanding DC – 20 MHz Dynamic Range and Low Phase Noise Mean You Can Make High-Performance Weak Signal and Phase Noise Measurements

Applications

    • Analog and Digital Modulation Signal Quality Analysis
    • Understanding Frequency and Spectral Occupancy Behavior Over Time
    • Capture and Characterization of Undesired, Unknown, or Interfering Signals
    • Device/system Design or Operational Diagnostic Measurement
    • Getting Answers to Elusive EMI Problems
    • VCO/synthesizer Design, RFID Device Characterization, General Purpose Digital Modulation Vector Signal Analysis, Spectrum Monitoring, Radar Measurements

Trigger, Capture, Analyze Your RF Signal

Quickly Solve Design, Production or Operational Problems With Comprehensive Characterization of Time-varying and Transient RF Signals

Define issues and solve problems faster by characterizing your device, system or signal more completely and rapidly than previously possible with swept spectrum analyzers. Tektronix RSA3300A Series Real-Time Spectrum Analyzers capture many signals not viewable on swept spectrum analyzers by seamlessly capturing and storing a span of RF frequencies all at one time*1. Once a signal is captured it can be viewed simultaneously and analyzed in time-correlated frequency, time and modulation domains. RSA Series instruments include not only Real-Time Spectrum Analyzer fast-signal capture, internal memory and modulation analysis but also functionality and operation of a swept spectrum analyzer for looking at very wide spans, all in an integrated, transportable package.

A000_1687-N

RSA Series Spectrogram uniquely shows time-varying signal behavior in frequency change/stability, spectrum occupancy, pulsed signal timing, power change and more! The sample on this page shows the frequency settling characteristic of a transmitting device.

A000_1688-N

Time-correlated multi-domain view provides a new level of insight about design or operational problems and possible solutions. The example on this page includes frequency, time, and modulation domain views of an AM-modulated pulsed signal with pulse-to-pulse phase variation measured in the modulation domain.

*1 See Tektronix Real-Time Spectrum Analysis Technical Brief (lit # 37W-17252) for an explanation of how RTSA works and its unique capabilities: /Measurement/App_Notes/37_17252/eng/

Trigger, Capture, Analyze
You Can Easily Catch an Elusive RF Signal and Analyze It at Your Convenience

Sensitive and fast, RSA Series Real-Time Spectrum Analyzer triggering easily captures unknown, periodic or intermittent signals. Using the Tektronix exclusive Frequency Mask Trigger, you can configure a custom frequency domain mask including signal guard bands and levels then trigger on events isolated to a specific frequency or frequency range. As signals are captured, they are automatically saved to RSA internal memory, making it easy to perform in-depth, time-correlated analysis across the frequency, time and modulation domains with no external computer required! Quick-to-set-up IF Level and Power (Span Bandwidth) triggers provide very convenient capture of signals in applications such as incident carrier-and-response interaction between two devices or burst signal carrier ramp up. Continuous Trigger Mode ensures a sequence of events are automatically captured into memory; you capture only the events and not time in between, maximizing memory efficiency and minimizing analysis time.

Price/Performance choice: RSA3300A Series Real-Time Spectrum Analyzers

RSA Model

Frequency Range

Memory Depth

Modulation Analysis

Real-Time Capture Bandwidth

Triggering Modes

3303A

DC – 3 GHz

16.384 Msamples, 65.536 Msamples (Option 02)

AM, FM (ASK, FSK), PM; general purpose digital mod analysis (Option 21)

15 MHz

IF Level; Frequency Mask Trigger and Power (Span BW) (Option 02)

3308A

DC – 8 GHz

16.384 Msamples, 65.536 Msamples (Option 02)

AM, FM (ASK, FSK), PM; general purpose digital mod analysis (Option 21)

15 MHz

IF Level; Frequency Mask Trigger and Power (Span BW) (Option 02)

Characteristics

Frequency

   

RSA3303A

RSA3308A

Frequency Range

DC – 3 GHz

DC – 8 GHz

Frequency Aging

±1 x 10–7 / year

±1 x 10–7 / year

Frequency Stability

1 x 10–7 (10 °C to 40 °C)

1 x 10–7 (10 °C to 40 °C)

Opt.10: 1 x 10–7 (10 °C to 40 °C)

Opt.10: 1 x 10–7 (10 °C to 40 °C)

Total Reference Frequency Error

2 x 10–7

2 x 10–7

Marker Frequency Readout Accuracy: ± (RE × MF + 0.001 × Span + RFM ) Hz.

RE

Reference Frequency Error

MF

Marker Frequency [Hz]

RFM

Residual FM [Hz]

 Carrier Frequency Measurement Accuracy

RSA3303A and RSA3308A - At spans of ≤15 MHz for RSA3300A, all frequency components of the signal must be contained in the analysis period and span.

Carrier Frequency Measurement Sensitivity - Carrier Power, > –40 dbfs (typical) (dBfs = dB below full screen reference).

Accuracy: RE × CF + RFM. Resolution Setting = 1 mHz to 1 MHz.

At 2 GHz

±202 Hz.

At 5 GHz

±502 Hz.

At 7 GHz

±702 Hz.

Frequency Span

Range

   

RSA3303A and RSA3308A

   

Spectrum Analyzer Mode

50 Hz to 3 GHz, (Start Frequency ≥20 MHz).

50 Hz to 20 MHz, (Stop Frequency < 20 MHz).

Real Time Spectrum Analyzer Mode

100 Hz – 10 MHz, 15 MHz (RF); 20 MHz (Baseband).

Time Domain and Demodulation Modes

Span = 0 Hz (Simultaneous with 50 Hz to 15 MHz Span in second analysis window).

   Resolution

< 0.2% of Span (Span = 100 Hz to 10 MHz, 15 MHz, RSA3303A and RSA3308A).

   Accuracy

±0.1% of Span.

Resolution Bandwidth

Range

1 Hz to 10 MHz, automatically selected or user defined.

Accuracy

Within 6.0% ±0.1%.

Shape Characteristic

Gaussian, <5:1 Shape Factor (3:60 dB); Rectangular, Nyquist, Root Nyquist shapes may also be selected.

Noise Bandwidth

   

   Range

313.18 mHz to 400.87 kHz

   Accuracy

±0.1%

FFT Performance

Number of samples per frame

64 to 8192 (65536 samples / frame, extended resolution).

Window types

Rectangular, Parzen, Welch, Sine-Lobe, Hanning, Sine-Cubed, Sine-To-The-4th, Hamming, Blackman, Rosenfield, Blackman-Harris 3A, Blackman-Harris 3B, Blackman-Harris 4A, Blackman-Harris 4B, FlatTopn.

Stability

Noise Sidebands, dBc/Hz

   

RSA3303A, RSA3308A

RSA3308A

   

At 1 GHz CF

At 2 GHz CF

At 6 GHz CF

Offset

Spec

Typical

Spec

Typical

Spec

Typical

1 kHz

≤–100

≤–103

≤–96

≤–99

≤–87

≤–90

10 kHz

≤–105

≤–108

≤–104

≤–107

≤–104

≤–107

20 kHz

≤–105

≤–108

≤–105

≤–108

≤–105

≤–108

30 kHz

≤–105

≤–108

≤–105

≤–108

≤–105

≤–108

100 kHz

≤–112

≤–115

≤–112

≤–115

≤–112

≤–115

1 MHz

≤–132

≤–135

≤–132

≤–135

≤–128

≤–131

5 MHz

≤–135

≤–138

≤–135

≤–138

≤–130

≤–133

7 MHz

≤–135

≤–138

≤–135

≤–138

≤–130

≤–133

Residual FM at 1 kHz RBW - RSA3303A and RSA3308A: 2 Hzp-p.

Time Domain

Trace Point Range

Span >50 Hz, 64 – 240001 (RBW mode), 18 – 240001 (FFT mode).

Span = 0 Hz (Time and Demodulation Modes).

RSA3303A and RSA3308A

IQ Data Pairs: 1024 to 16384000, 1 to 65536000 (Option 02) Power vs. Time: 1 to 512000.

Triggers

RSA3303A and RSA3308A

Free run, single, external, IF level (15 MHz BW).

Option 02

Adds Power (Span BW, Span <15 MHz) and Frequency Mask.

Frequency Mask Trigger (Real Time SA Mode), RSA3303A and RSA3308A with Opt. 02

Bandwidth

Up to 15 MHz: Start Frequency ≥20 MHz.

Up to 20 MHz: Start Frequency <20 MHz, and on IQ inputs.

Event Detection Bandwidth

≤5 MHz (100% probability of intercept), signal occupying at least one complete ≥160 μs frame).

10 MHz (50% probability of intercept, signal occupying at least one complete 80 μs frame (typical)).

15/20 MHz (25% probability of intercept, signal occupying at least one complete 40 μs frame (typical)).

Frequency Mask Range

0 to -6 divisions from Reference Level at 10 dB/div.

Mask Shape

User Defined.

Minimum Horizontal Mask Setting Resolution

< 0.2% of Span.

Minimum Frequency Width

< 0.2% of Span.

Uncertainty

±2 frames.

Amplitude Specifications

Input Attenuator Range

   

Maximum Safe Input Level

   

Measurement Range

Displayed average noise level to MAX safe input.

   RSA3303A

0 – 50 dB, 2 dB steps, DC to 3.0 GHz.

   RSA3308A

0 – 50 dB, 2 dB steps, DC to 3.5 GHz.

0 – 50 dB, 10 dB steps, 3.5 to 8.0 GHz.

Average Continuous

+30 dBm (RF ATT ≥ 10 dB).

Peak Pulse Power

+30 dBm (RF ATT ≥ 10 dB).

DC: RSA3303A, RSA3308A

±0 .2 V (CF ≥ 20 MHz); ±5 V DC – 20 MHz.

Spurious Responses

Third Order Intermodulation Distortion

100 MHz – 3 GHz

   RSA3303A, RSA3308A

< –74 dBc (Ref Level = +5 dBm , RF Att.= 20 dB, total signal power = -7 dBm, signal separation 300 kHz).

3 GHz – 8 GHz

   RSA3308A

< –72 dBc (Ref Level = +5 dBm , RF Att.= 20 dB, total signal power = -7 dBm, signal separation 300 kHz).

Other-Input Related Spurious

> 30 kHz offset – 70 dBc (Span = 2 MHz, Ref Level = 0 dBm, RBW=50 kHz, Signal Level = –5 dBm, any center frequency).

Non-Input Related Spurious

(Ref = –30 dBm, RBW = 100 kHz, Span 3 GHz)

RSA3303A

1 MHz - 20 MHz: –93 dBm.

20 MHz - 3 GHz: –90 dBm.

RSA3308A

1 MHz - 20 MHz: –93 dBm.

20 MHz - 3.5 GHz: –90 dBm.

3.5 GHz - 8 GHz: –85 dBm.

1 dB Gain Compression

   

RSA3303A, RSA3308A

+2 dBm (RF ATT = 0 dB, 2 GHz).

Displayed Average Noise Level (DANL)

Frequency

RSA3303A, RSA3308A (Spec, dBm/Hz)

RSA3303A, RSA3308A (Typical, dBm/Hz, With Preamp)

1 kHz – 10 kHz

–144

N/A

10 kHz – 10 MHz

–151

N/A

10 MHz – 100 MHz

–151

N/A

100 MHz – 1 GHz

–151

–164

1 GHz – 2 GHz

–150

–164

2 GHz – 3 GHz

–150

–158

3 GHz – 5 GHz

–142*3

N/A

5 GHz – 8 GHz

–142*3

N/A

*3 RSA3308A only.

Log Display Range

10 μdB/div to 10 dB/div.

Linear Display Scale

10 divisions.

Linear Display Units

dBm, dBμV, V, Watts + Hz for FM Demod, Degrees for PM Demod.

Marker Readout Resolution, Log

0.01 dB.

Marker Readout Resolution, Linear

0.001 μV.

Frequency Response

RSA3303A, RSA3308A

Frequency Range

Specification, dB

Typical, dB

100Hz – 20 MHz

± 0.5

± 0.3

15 MHz – 3 GHz

± 1.2

± 0.5

3.0 GHz – 3.5 GHz*3

± 1.7

± 0.5

3.5 GHz – 6.5 GHz*3

± 1.7

± 1.0

5 GHz – 8 GHz*3

± 1.7

± 1.0

*3 RSA3308A only.

Input Attenuation Switching Uncertainty (at 50 MHz)

< 0.5 dB for all values of attenuation.

IQ Input Attenuator Range, RSA3303A Opt. 03 and RSA3308A Opt. 03

0–30 dB, 10 dB steps.

IQ Input Attenuator Switching Uncertainty, RSA3303A Opt. 03 and RSA3308A Opt. 03

< 0.5 dB for all values of attenuation.

Absolute Amplitude Uncertainty

   At Reference Setting

±0.5 dB (RF) at 50 MHz CF, –20 dBm signal, 0 dB ATT, 20 °C to 30 °C; ±0.3 (baseband) (Opt. 05) at 10 MHz CF, –20 dBm signal, 0 dB ATT, 20 °C to 30 °C.

   Overall Amplitude Accuracy

±0.7 dB (RF) + Frequency Response.

RF Input VSWR

Frequency Range

VSWR, at 10dB RF Attenuation (Typical, dB)

300 kHz – 10 MHz*4

< 1.4

10 MHz – 3 GHz

< 1.3

3 GHz – 8 GHz*4

< 1.4

*4 RSA3303A and RSA3308A.

Resolution Bandwidth Switching Uncertainty

   

Reference Level

   

Display Scale Fidelity

   

   1 Hz to 10 MHz

± 0.05 dB.

   Range

–51 to +30 dBm.

   Resolution

1 dB.

   Accuracy

±0.2 dB (–10 dBm to –50 dBm) at 50 MHz.

   Log scale (max. cumulative), > 0 dB – 50 dB

< ±0.2 dB; < ±0.12 dB, typical at 0 dBm reference level.

   Linear scale

±2% of Reference Level.

   Linear to Log scale Switching Uncertainty

0.05%.

   Amplitude Reference Output

–20 dBm, 50 MHz, internally switched to input.

Seamless Capture and Processing

Memory Depth (time) - RSA3303A and RSA3308A

Span

Sample Rate

Record Length

Record Length (Opt. 02)

Spectrum Frame Time

20 MHz (Baseband)

25.6 Msps

0.64 s

2.56 s

40 μs

15 MHz

25.6 Msps

0.64 s

2.56 s

40 μs

10 MHz

12.8 Msps

1.28 s

5.12 s

80 μs

5 MHz

6.4 Msps

2.56 s

10.24 s

160 μs

2 MHz

3.2 Msps

5.12 s

20.48 s

320 μs

1 MHz

1.6 Msps

10.24 s

40.96 s

640 μs

500 kHz

800 ksps

20.48 s

81.92 s

1.280 ms

200 kHz

320 ksps

51.20 s

200.48 s

3.2 ms

100 kHz

160 ksps

102.40 s

409.60 s

6.4 ms

50 kHz

80 ksps

204.80 s

819.20 s

12.8 ms

20 kHz

32 ksps

512 s

2048 s

32 ms

10 kHz

16 ksps

1024 s

4096 s

64 ms

5 kHz

8 ksps

2048 s

8192 s

128 ms

2 kHz

3.2 ksps

5120 s

20480 s

320 ms

1 kHz

1.6 ksps

10240 s

40960 s

640 ms

500 Hz

800 sps

20480 s

81920 s

1.28 s

200 Hz

320 sps

51200 s

204800 s

2.56 s

100 Hz

160 sps

102400 s

409600 s

5.12 s

Memory Depth (Samples)

RSA3303A and RSA3308A: 16.384 Msamples; 65.536 Msamples (Opt. 02).

Real Time Capture Bandwidth (Seamless Data Capture)

RSA3303A and RSA3308A: 15 MHz (rf); 20 MHz, DC– 20 MHz (Baseband); 20 MHz, IQ Inputs (Opt.03).

Data Samples per Frame (Real Time S/A Mode)

1024 .

Block Size (number of frames)

RSA3303A and RSA3308A: 1 to 16000; 1 to 64000 (Opt. 02).

Maximum A/D Sampling Rate and Resolution

51.2 Msamples/sec, 14 bits.

Measurement Speed

Screen Update Rate

38/Sec, (SA Mode, 2 MHz span, 128 point FFT).

35/Sec, (SA Mode, 2 MHz span, 1024 point FFT).

Remote Measurement Rate and GPIB Transfer rate

7000 Samples/Sec at 2 MHz span Auto RBW Spectrum data.

Ethernet Transfer Rate

2.6 Mbyte/Sec (256 Mbyte .IQT file transfer).

RF Center Frequency Switching Time

<10 ms for 10 MHz frequency change; <500 ms for 3 GHz frequency change.

Traces, Displays, Detectors

Traces

2 traces, Spectrum Analyzer Mode.

Displays

Up to 3 time-correlated, user-selected displays from the following: Spectrum, Spectrogram, Amplitude vs. Time, Frequency vs. Time, Phase vs. Time, IQ vs. time; RSA3303A Opt. 21 and RSA3308A Opt. 21 add: Constellation, EVM vs. time, Symbol Table, Eye Diagram.

Detector

RMS.

Trace Types

Normal (RMS), Average, Max Hold, Min Hold.

Display Detection

Max, Min, Max/Min.

Inputs and Outputs

Front Panel

   

Rear Panel

   

Side Panel

   

Input

50 Ω, type N.

Preamp Power

Standard RSA3303A and RSA3308: LEMO 6 pin connector - Pin 1, NC; Pin 2, ID1; Pin 3,ID2; Pin 4, -12V; Pin 5, GND; Pin 6, +12V.

10 MHz REF OUT

50 Ω, BNC, >–3 dBm.

10 MHz REF IN

50 Ω, BNC, –10 dBm – +6 dBm.

I, +I, Q, +Q inputs

RSA3303A with Opt. 03, and RSA3308A with Opt. 03.

EXT TRIG IN

Ext Trig. BNC, High: 1.6 to 5.0 V, Low: 0 to 0.5 V .

GPIB Interface

IEEE 488.2

TRIGGER OUT

50 Ω, BNC, High >2.0 V, Low: < 0.4 V (output current 1 mA).

LAN Interface (Ethernet)

10/100 Base-T (std.).

Serial Interface

USB 1.1, 2 ports.

VGA Output

VGA compatible, 15 pin DSUB.

Automated Measurements

Automated Measurements: Channel Power, ACPR, Carrier to Noise, Occupied BW, Carrier Frequency, Emission BW, Spurious Search, CCDF, dB/Hz Mkr, dBc/Hz Mkr.

Preamplifier (RSA3300A Series Opt. 1A, external)

Frequency Range

100 MHz – 3 GHz.

Gain

20 dB.

Noise Figure

6.5 dB at 2 GHz.

Modulation Analysis

FM (may be used to evaluate FSK signals)

AM (may be used to evaluate ASK signals)

PM

   

   Minimum Input Level

-40 dBfs*5, typical.

   Range

0.8 Hz to 12.8 MHz.

   Accuracy

± 1% of span (Signal at center screen, input level –10 dBfs*5).

   Minimum Input Level

-40 dBfs*5, typical

   Accuracy

±2 % (Signal at center screen, input level –10 dBfs*5, 10 % to 60 % modulation depth).

   Minimum Input Level

-40 dBfs*5, typical.

   Accuracy

±3°, (Signal at center screen, input level –10 dBfs*5).

   PM Scale, Max, Min

± 180°.

*5 dBfs = dB relative to full screen reference.

Digital Modulation (RSA3303A with Opt. 21, RSA3308A with Opt. 21)

Modulation Format

BPSK, QPSK, π/4 DQPSK, 8PSK, 16QAM, 32QAM, 64QAM, 256QAM, GMSK, GFSK.

Analysis Period

Up to 7680 sample points.

Filter Types

   

   Measurement Filters

Square Root Raised Cosine, none.

   Reference Filters

Raised Cosine, Gaussian, none.

Alpha / B*T range

0.0001 to 1, 0.0001 step.

Maximum Symbol Rate

12.8 Msymbols/sec.

Minimum Symbol Rate

100 Symbols/sec (Typical).

Vector Display Formats

Polar

   

IQ Versus Time

   

   Constellation

Data displayed at symbol times.

   Vector

X to Y Points displayed between symbols.

   I, Q

Continuous versus time over analysis window.

   Trellis

Adjustable, 1 to 16 symbols.

   Eye Diagram

Adjustable, 1 to 16 symbols.

   Error Measurements Versus Time

EVM, Magnitude Error, Phase Error.

   Error Measurements

Waveform Quality (ρ), Frequency Error Measurement, Origin Offset Measurement.

   Symbol Table

Binary, Octal, Hexadecimal.

Digital Demodulation Accuracy

The following tables are examples of typical digital demodulation accuracy:

EVM (%), typical

Symbol Rate, per second

100k

1M

4M

10M

   

QPSK

π/4 DQPSK

16 QAM

QPSK

π/4 DQPSK

16 QAM

QPSK

π/4 DQPSK

16 QAM

QPSK

π/4 DQPSK

16 QAM

CF = 1 GHz

0.5

0.6

0.9

0.5

0.6

0.5

1.2

1.2

1.2

2.7

2.7

2.2

CF = 2 GHz

0.5

0.6

0.9

0.5

0.6

0.5

1.2

1.2

1.2

2.7

2.7

2.2

CF = 3 GHz

0.7

0.7

0.9

0.7

0.7

0.5

1.5

1.5

1.2

2.9

2.9

2.5

CF = 5 GHz*3

0.7

0.7

0.9

0.7

0.7

0.5

1.5

1.5

1.2

3.0

3.0

2.5

*3 RSA3308A only.

General Specifications

Temperature Range

   

   Operating

+10 °C to +40 °C.

   Storage

–20 °C to +60 °C.

Warm-up Time

20 min.

Safety and EMI Compatibility

UL 61010B-1; CSA C22.2 No.1010.1.

EC Council Low Voltage Directive (LVD) 73/23/EEC, amended by 93/68/EEC.

EC Council EMC Directive 89/336/EEC, amended by 93/68/EEC.

Power Requirements

100 VAC to 240 VAC, 47 Hz to 63 Hz.

Power Consumption

350 VA max.

Data Storage

Internal HDD (20 GB) + USB port + Floppy Disk Drive.

Weight, without options

19 kg.

Dimensions

   

   Without bumpers and feet

215 mm (H) x 425 mm (D) x 425 mm (W)

   With bumpers and feet

238 mm (H) x 470 mm (D) x 445 mm (W)

Calibration Interval

1 year.

Warranty

1 year.

Ordering Information

RSA3303A

Real-Time Spectrum Analyzer, DC – 3 GHz.

RSA3308A

Real-Time Spectrum Analyzer, DC – 8 GHz.

Standard Accessories

User Manual, Programmers manual, power cord, USB keyboard, USB mouse, BNC-N adapter.

Options

Opt. 1R

Rackmount.

Opt. 1A

External preamp, 20 dB gain to 3 GHz.

Opt. 02

256 MB Data Memory with Frequency Mask Trigger and Power (Span BW) Trigger.

Opt. 03

Differential IQ Inputs.

Opt. 21

General Purpose Digital Modulation Analysis.

Upgrades

RSA3UP 21

General Purpose Digital Modulation Analysis Upgrade (customer installable).

RSA3UP IF

Installation for RSA3UP 21.

International Power Plugs

Opt. A0

North America power.

Opt. A1

Universal EURO power.

Opt. A2

United Kingdom power.

Opt. A3

Australia power.

Opt. A4

240 V, North America power.

Opt. A5

Switzerland power.

Opt. A6

Japan power.

Opt. A10

China power.

Opt. A99

No power cord or AC adapter.

Language Option

Option L0

English User/Programmers Manual.

Option L5

Japanese User/Programmers Manual.

Service Options

Opt. C3

Calibration Service 3 Years.

Opt. C5

Calibration Service 5 Years.

Opt. D1

Calibration Data Report.

Opt. D3

Calibration Data Report 3 Years (with Option C3).

Opt. D5

Calibration Data Report 5 Years (with Option C5).

Opt. R3

Repair Service 3 Years.

Opt. R5

Repair Service 5 Years.