Live Chat with Tek representatives. Available 9:00 AM - 5:00 PM CET.
Buffered Passive Probe
The products on this datasheet are no longer being sold by Tektronix. Contact Technical Support for alternative products View Tektronix Encore for used test equipment Check support and warranty status for these products Find more support information for these products
Features & Benefits
- 300 VRMS CAT II Maximum Input Voltage
- 8 pF Input Capacitance
- 10 MΩ Input Resistance
- Scope Controlled Parameters
- Connects to TEKPROBE™ III Interface Instruments
- Compact Probe Tip Compatible with a Wide Range of Tektronix Accessories and Adapters
- TEKPROBE III Interface Allows Control of Key Probe Parameters
- Input Gain
- AC/DC Coupling
- Bandwidth Limiting
- DC Offset
- General Purpose
- Digital Design
- Power Device Characterization
- Mixed Signal
Designed for TEKPROBE III, TDS794D and TDS694C
The P6339A 500 MHz Buffered Passive Probe is a revolutionary leap in probe technology. The P6339A's wide dynamic range makes it ideal for general purpose measurement applications.
To facilitate SMD probing, the P6339A comes standard with a set of SureFoot® adapters. The compact probe head/tip assembly is compatible with the full line of 3.5 mm (compact) accessories. The P6339A probe is designed exclusively for the TDS794D and TDS694C instruments.
Maximum Input Voltage - 300 VRMS CAT II.
Voltage Sensitivity - 10 mV/div to 100 V/div in a 1, 2, 5 sequence.
DC Attenuation Accuracy - ±4%.
Output Offset - ≤±5 mV.
Bandwidth - DC to 500 MHz.
Rise Time - 700 ps.
Input C - 8 pF.
Input R - 10 MΩ.
Bandwidth Limit - Selectable 20 MHz and 150 MHz.
Coupling - AC/DC, <10 Hz Cutoff.
Output Termination - TEKPROBE™ III interface/50 Ω termination.
Probe Tip/Head Style - 3.5 mm/Compact.
Output Cable Length - 1.3 m.
Temperature - Operating: +10 °C to +40 °C (+50 °F to +104 °F).
Safety - UL3111-2-031, CSAS1010.2.031, EN61010-2-031, IEC61010-2-031.
Figure 1. P6339A input impedance.
Figure 2. P6339A input phase.
Figure 3. SMK4 Micro KlipChip™ adapter.
Figure 4. SF200A Series SureFoot® adapters.
500 MHz Buffered Passive Probe.
Includes: Adjustment tool (003-1433-02); attenuator tip cover (204-1049-00); retractable hook tip (013-0107-07); 2 ea. 50 mil, 25 mil (0.65 mm), and 0.5 mm SureFoot adapters; 2-in. ground lead (195-4240-00); 6-in. ground lead with 0.025 in. square-pin receptacle (196-3113-02); 6-in. ground lead with alligator clip (196-3305-00); SMT KlipChip adapter (206-0364-01); low inductance lead ground collar (343-1003-01); 2 ea. pairs of colored cable markers (016-0633-00); accessory pouch; instruction sheet (071-0178-01).
Opt. C3 - Calibration Service 3 Years
Opt. C5 - Calibration Service 5 Years
Opt. D1 - Calibration Data Report
Opt. D3 - Calibration Data Report 3 Years (with Option C3)
Opt. D5 - Calibration Data Report 5 Years (with Option C5)
Opt. R3 - Repair Service 3 Years
Opt. R5 - Repair Service 5 Years
SureFoot Adapter, Orange, 50 mil (12 ea.) - Order SF201A.
SureFoot Adapter, Blue, 0.65 mm/25 mil (12 ea.) - Order SF202A.
SureFoot Adapter, Red, 0.50 mm/20 mil (12 ea.) - Order SF203A.
KlipChip Adapter (20 ea.) - Order SMG50.
Micro KlipChip Adapter (4 ea.) - Order SMK4.