Current Probe

Current Probe

Tektronix current probe solutions offer:

  • The broadest range of AC/DC and AC-only current probes
  • Measurement accuracy from uAs to 2000 A
  • Best-in-class bandwidth up to 120 MHz
  • Best-in-class current clamp sensitivity down to 1 mA
  • The only products with 3rd Party Safety Certification (UL, CSA, ETL)
  • The only products with bare wire voltage ratings
  • Automatic readout and scaling when used with Tektronix oscilloscopes so you don’t have to convert volts to amps or manually set the scaling

See more probes »

 

Current Probe
Model Maximum Current Minimum Current Bandwidth Rise Time List Price
A621
View Compatible Instruments
DPO/DSA/MSO70000TCA-1MEG Adapter Required
DPO7000CCompatible but requires manual setup
MDO3000Compatible but requires manual setup
MDO4000CCompatible but requires manual setup
MSO/DPO2000Compatible but requires manual setup
MSO/DPO2000BCompatible but requires manual setup
MSO/DPO3000Compatible but requires manual setup
MSO/DPO4000Compatible but requires manual setup
MSO/DPO5000Compatible but requires manual setup
MSO/DPO5000BCompatible but requires manual setup
MSO4000BCompatible but requires manual setup
TBS1000/TBS1000B/TBS1000B-EDUCompatible but requires manual setup
TBS2000Compatible but requires manual setup
TDS2000Compatible but requires manual setup
TDS3000Compatible but requires manual setup
TDS5000Compatible but requires manual setup
TDS6000Compatible but requires manual setup
TDS7000Compatible but requires manual setup
THS3000Compatible but requires manual setup
TPS2000Compatible but requires manual setup

RMS: 1000 A
Peak: 2000 A

10 mA

50 kHz

-
-
Configure & Quote
A622
View Compatible Instruments
DPO/DSA/MSO70000TCA-1MEG Adapter Required
DPO7000CCompatible but requires manual setup
MDO3000Compatible but requires manual setup
MDO4000CCompatible but requires manual setup
MSO/DPO2000Compatible but requires manual setup
MSO/DPO2000BCompatible but requires manual setup
MSO/DPO3000Compatible but requires manual setup
MSO/DPO4000Compatible but requires manual setup
MSO/DPO5000Compatible but requires manual setup
MSO/DPO5000BCompatible but requires manual setup
MSO4000BCompatible but requires manual setup
TBS1000/TBS1000B/TBS1000B-EDUCompatible but requires manual setup
TBS2000Compatible but requires manual setup
TDS2000Compatible but requires manual setup
TDS3000Compatible but requires manual setup
TDS5000Compatible but requires manual setup
TDS6000Compatible but requires manual setup
TDS7000Compatible but requires manual setup
THS3000Compatible but requires manual setup
TPS2000Compatible but requires manual setup

DC: 100 A
Max RMS: 71 A
Peak Current: 100 A

50 mA

100 kHz

-
-
Configure & Quote
CT2
View Compatible Instruments
DPO/DSA/MSO70000TCA-BNC Adapter Required. Use with P6041 cable
DPO7000CUse with P6041 Cable
MDO3000Use with P6041 Cable
MDO4000CUse with P6041 Cable
MSO/DPO2000011-0049-0X Adapter Required. Use with P6041 cable
MSO/DPO2000B011-0049-0X Adapter Required. Use with P6041 cable
MSO/DPO3000Use with P6041 Cable
MSO/DPO4000Use with P6041 Cable
MSO/DPO5000Use with P6041 Cable
MSO/DPO5000BUse with P6041 Cable
MSO4000BUse with P6041 Cable
TBS1000/TBS1000B/TBS1000B-EDU011-0049-0X Adapter Required. Use with P6041 cable
TBS2000011-0049-0X Adapter Required. Use with P6041 cable
TDS2000011-0049-0X Adapter Required. Use with P6041 cable
TDS3000Use with P6041 Cable
TDS5000Use with P6041 Cable
TDS6000TCA-BNC Adapter Required. Use with P6041 cable
TDS7000TCA-BNC Adapter Required. Use with P6041 cable
THS3000011-0049-0X Adapter Required. Use with P6041 cable
TPS2000011-0049-0X Adapter Required. Use with P6041 cable

Peak: 36 A 
Max RMS: 2.5 A continuous

1 mA

200 MHz

< 500 ps

-
Configure & Quote
CT1
View Compatible Instruments
DPO/DSA/MSO70000TCA-BNC Adapter Required. Use with P6041 cable
DPO7000CUse with P6041 Cable
MDO3000Use with P6041 Cable
MDO4000CUse with P6041 Cable
MSO/DPO2000011-0049-0X Adapter Required. Use with P6041 cable
MSO/DPO2000B011-0049-0X Adapter Required. Use with P6041 cable
MSO/DPO3000Use with P6041 Cable
MSO/DPO4000Use with P6041 Cable
MSO/DPO5000Use with P6041 Cable
MSO/DPO5000BUse with P6041 Cable
MSO4000BUse with P6041 Cable
TBS1000/TBS1000B/TBS1000B-EDU011-0049-0X Adapter Required. Use with P6041 cable
TBS2000011-0049-0X Adapter Required. Use with P6041 cable
TDS2000011-0049-0X Adapter Required. Use with P6041 cable
TDS3000Use with P6041 Cable
TDS5000Use with P6041 Cable
TDS6000TCA-BNC Adapter Required. Use with P6041 cable
TDS7000TCA-BNC Adapter Required. Use with P6041 cable
THS3000011-0049-0X Adapter Required. Use with P6041 cable
TPS2000011-0049-0X Adapter Required. Use with P6041 cable

Peak: 12 A 
Max RMS: 450 mA continuous

200 μA

1 GHz

< 350 ps

-
Configure & Quote
CT6
View Compatible Instruments
DPO/DSA/MSO70000TCA-SMA Adapter Required
DPO7000CSMA-BNC Adapter required
MDO3000SMA-BNC Adapter required
MDO4000CSMA-BNC Adapter required
MSO/DPO2000SMA-BNC Adapter required. 011-0049-0X Adapter Required
MSO/DPO2000BSMA-BNC Adapter required. 011-0049-0X Adapter Required
MSO/DPO3000SMA-BNC Adapter required
MSO/DPO4000SMA-BNC Adapter required
MSO/DPO5000SMA-BNC Adapter required
MSO/DPO5000BSMA-BNC Adapter required
MSO4000BSMA-BNC Adapter required
TBS2000SMA-BNC Adapter required. 011-0049-0X Adapter Required
TDS2000SMA-BNC Adapter required. 011-0049-0X Adapter Required
TDS3000SMA-BNC Adapter required.
TDS5000SMA-BNC Adapter required.
TDS6000TCA-SMA Adapter Required
TDS7000TCA-SMA Adapter Required
THS3000SMA-BNC Adapter required. 011-0049-0X Adapter Required
TPS2000SMA-BNC Adapter required. 011-0049-0X Adapter Required

Peak: 6 A 
Max RMS: 120 mA continuous

200 μA

2 GHz

< 200 ps

-
Configure & Quote
TRCP0300
View Compatible Instruments
DPO/DSA/MSO70000TCA-1MEG Adapter required
DPO7000CCompatible but requires manual setup
MDO3000Compatible but requires manual setup
MDO4000CCompatible but requires manual setup
MSO/DPO2000Compatible but requires manual setup
MSO/DPO2000BCompatible but requires manual setup
MSO/DPO3000Compatible but requires manual setup
MSO/DPO4000Compatible but requires manual setup
MSO/DPO5000Compatible but requires manual setup
MSO/DPO5000BCompatible but requires manual setup
MSO4000BCompatible but requires manual setup
TBS1000/TBS1000B/TBS1000B-EDUCompatible but requires manual setup
TBS2000Compatible but requires manual setup
TDS2000Compatible but requires manual setup
TDS3000Compatible but requires manual setup
TDS5000Compatible but requires manual setup
TDS6000TCA-1MEG Adapter required
TDS7000TCA-1MEG Adapter required
THS3000Compatible but requires manual setup
TPS2000Compatible but requires manual setup

300 A

250 mA

30 MHz

-
-
Configure & Quote
P6021A
View Compatible Instruments
DPO/DSA/MSO70000TCA-1MEG Adapter Required
DPO7000CCompatible but requires manual setup
MDO3000Compatible but requires manual setup
MDO4000CCompatible but requires manual setup
MSO/DPO2000Compatible but requires manual setup
MSO/DPO2000BCompatible but requires manual setup
MSO/DPO3000Compatible but requires manual setup
MSO/DPO4000Compatible but requires manual setup
MSO/DPO5000Compatible but requires manual setup
MSO/DPO5000BCompatible but requires manual setup
MSO4000BCompatible but requires manual setup
TBS1000/TBS1000B/TBS1000B-EDUCompatible but requires manual setup
TBS2000Compatible but requires manual setup
TDS2000Compatible but requires manual setup
TDS3000Compatible but requires manual setup
TDS5000Compatible but requires manual setup
TDS6000TCA-1MEG Adapter required
TDS7000TCA-1MEG Adapter required
THS3000Compatible but requires manual setup
TPS2000Compatible but requires manual setup

Max RMS: 10.6 A
Peak Current: 250 A

10 mA

60 MHz

< 5.8 ns

-
Configure & Quote
TCP305A
View Compatible Instruments
DPO/DSA/MSO70000TCA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
DPO7000CTPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MDO3000TPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MDO4000CTPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO/DPO2000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
MSO/DPO2000BTCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
MSO/DPO3000TPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO/DPO4000TPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO/DPO5000TPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO/DPO5000BTPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO4000BTPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
TBS1000/TBS1000B/TBS1000B-EDUTCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TBS2000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TDS2000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TDS3000TCPA300 Amplifier with TekProbe Interface cable
TDS5000Requires TCPA300 Amplifier with TekProbe Interface cable
TDS6000TCA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
TDS7000TCA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
THS3000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TPS2000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable

DC: 50 A
Max RMS: 35.4 A
Peak Current: 50 A

5 mA

50 MHz

< 7 ns

-
Configure & Quote
TRCP3000
View Compatible Instruments
DPO/DSA/MSO70000TCA-1MEG Adapter required
DPO7000CCompatible but requires manual setup
MDO3000Compatible but requires manual setup
MDO4000CCompatible but requires manual setup
MSO/DPO2000Compatible but requires manual setup
MSO/DPO2000BCompatible but requires manual setup
MSO/DPO3000Compatible but requires manual setup
MSO/DPO4000Compatible but requires manual setup
MSO/DPO5000Compatible but requires manual setup
MSO/DPO5000BCompatible but requires manual setup
MSO4000BCompatible but requires manual setup
TBS1000/TBS1000B/TBS1000B-EDUCompatible but requires manual setup
TBS2000Compatible but requires manual setup
TDS2000Compatible but requires manual setup
TDS3000Compatible but requires manual setup
TDS5000Compatible but requires manual setup
TDS6000TCA-1MEG Adapter required
TDS7000TCA-1MEG Adapter required
THS3000Compatible but requires manual setup
TPS2000Compatible but requires manual setup

3000 A

500 mA

16 MHz

-
-
Configure & Quote
TRCP0600
View Compatible Instruments
DPO/DSA/MSO70000TCA-1MEG Adapter required
DPO7000CCompatible but requires manual setup
MDO3000Compatible but requires manual setup
MDO4000CCompatible but requires manual setup
MSO/DPO2000Compatible but requires manual setup
MSO/DPO2000BCompatible but requires manual setup
MSO/DPO3000Compatible but requires manual setup
MSO/DPO4000Compatible but requires manual setup
MSO/DPO5000Compatible but requires manual setup
MSO/DPO5000BCompatible but requires manual setup
MSO4000BCompatible but requires manual setup
TBS1000/TBS1000B/TBS1000B-EDUCompatible but requires manual setup
TBS2000Compatible but requires manual setup
TDS2000Compatible but requires manual setup
TDS3000Compatible but requires manual setup
TDS5000Compatible but requires manual setup
TDS6000TCA-1MEG Adapter required
TDS7000TCA-1MEG Adapter required
THS3000Compatible but requires manual setup
TPS2000Compatible but requires manual setup

600 A

500 mA

30 MHz

-
-
Configure & Quote
P6022
View Compatible Instruments
DPO/DSA/MSO70000TCA-1MEG Adapter Required
DPO7000CCompatible but requires manual setup
MDO3000Compatible but requires manual setup
MDO4000CCompatible but requires manual setup
MSO/DPO2000Compatible but requires manual setup
MSO/DPO2000BCompatible but requires manual setup
MSO/DPO3000Compatible but requires manual setup
MSO/DPO4000Compatible but requires manual setup
MSO/DPO5000Compatible but requires manual setup
MSO/DPO5000BCompatible but requires manual setup
MSO4000BCompatible but requires manual setup
TBS1000/TBS1000B/TBS1000B-EDUCompatible but requires manual setup
TBS2000Compatible but requires manual setup
TDS2000Compatible but requires manual setup
TDS3000Compatible but requires manual setup
TDS5000Compatible but requires manual setup
TDS6000TCA-1MEG Adapter required
TDS7000TCA-1MEG Adapter required
THS3000Compatible but requires manual setup
TPS2000Compatible but requires manual setup

Max RMS: 4 A
Peak Current: 100 A

1 mA

120 MHz

< 2.9 ns

-
Configure & Quote
TCP312A
View Compatible Instruments
DPO/DSA/MSO70000TCA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
DPO7000CTPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MDO3000TPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MDO4000CTPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO/DPO2000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
MSO/DPO2000BTCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
MSO/DPO3000TPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO/DPO4000TPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO/DPO5000TPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO/DPO5000BTPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO4000BTPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
TBS1000/TBS1000B/TBS1000B-EDUTCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TBS2000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TDS2000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TDS3000TCPA300 Amplifier with TekProbe Interface cable
TDS5000Requires TCPA300 Amplifier with TekProbe Interface cable
TDS6000TCA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
TDS7000TCA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
THS3000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TPS2000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable

DC: 30 A
Max RMS: 21.2 A
Peak Current: 50 A

1 mA

100 MHz

< 3.5 ns

-
Configure & Quote
TCP202A
View Compatible Instruments
DPO7000CTPA-BNC Adapter required
MDO3000TPA-BNC Adapter required
MDO4000CTPA-BNC Adapter required
MSO/DPO2000TPA-BNC Adapter and TekVPI® External Power Supply (119-8726-xx) required
MSO/DPO2000BTPA-BNC Adapter and TekVPI® External Power Supply (119-8726-xx) required
MSO/DPO4000TPA-BNC Adapter required
MSO/DPO5000TPA-BNC Adapter required
MSO/DPO5000BTPA-BNC Adapter required
MSO4000BTPA-BNC Adapter required
TBS1000/TBS1000B/TBS1000B-EDU1103 PS Adapter and 011-0049-XX Adapter required
TDS3000Fully compatible
TDS5000Fully compatible

 

DC: 15 A
Max RMS: 15 A
Peak Current: 50 A

10 mA 50 MHz

< 7 ns

-
Configure & Quote
TCPA400
View Compatible Instruments
DPO/DSA/MSO70000TCA-BNC Adapter required
DPO7000CTPA-BNC Adapter required
MDO3000TPA-BNC Adapter required
MDO4000CTPA-BNC Adapter required
MSO/DPO2000Requires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
MSO/DPO2000BRequires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
MSO/DPO3000TPA-BNC Adapter required
MSO/DPO4000TPA-BNC Adapter required
MSO/DPO5000TPA-BNC Adapter required
MSO/DPO5000BTPA-BNC Adapter required
MSO4000BTPA-BNC Adapter required
TBS1000/TBS1000B/TBS1000B-EDURequires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TBS2000Requires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TDS2000Requires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TDS3000Fully compatible
TDS5000Fully compatible
TDS6000TCA-BNC Adapter required
TDS7000TCA-BNC Adapter required
THS3000Requires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TPS2000Requires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable

(Probe Dependent)

-

100 MHz

-
-
Configure & Quote
TCP2020
View Compatible Instruments
DPO/DSA/MSO70000TCA-1MEG Adapter required
DPO7000CCompatible but requires manual setup
MDO3000Compatible but requires manual setup
MDO4000CCompatible but requires manual setup
MSO/DPO2000Compatible but requires manual setup
MSO/DPO2000BCompatible but requires manual setup
MSO/DPO3000Compatible but requires manual setup
MSO/DPO4000Compatible but requires manual setup
MSO/DPO5000Compatible but requires manual setup
MSO/DPO5000BCompatible but requires manual setup
MSO4000BCompatible but requires manual setup
TBS1000/TBS1000B/TBS1000B-EDUCompatible but requires manual setup
TBS2000Fully compatible
TDS2000Compatible but requires manual setup
TDS3000Compatible but requires manual setup
TDS5000Compatible but requires manual setup
TDS6000TCA-1MEG Adapter required
TDS7000TCA-1MEG Adapter required
THS3000Compatible but requires manual setup
TPS2000Compatible but requires manual setup
20 A RMS, 100 A Peak Pulse 10 mA 50 MHz ≤7 ns
-
Configure & Quote
TCPA300
View Compatible Instruments
DPO/DSA/MSO70000TCA-BNC Adapter required
DPO7000CTPA-BNC Adapter required
MDO3000TPA-BNC Adapter required
MDO4000CTPA-BNC Adapter required
MSO/DPO2000Requires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
MSO/DPO2000BRequires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
MSO/DPO3000TPA-BNC Adapter required
MSO/DPO4000TPA-BNC Adapter required
MSO/DPO5000TPA-BNC Adapter required
MSO/DPO5000BTPA-BNC Adapter required
MSO4000BTPA-BNC Adapter required
TBS1000/TBS1000B/TBS1000B-EDURequires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TBS2000Requires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TDS2000Requires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TDS3000Fully compatible
TDS5000Fully compatible
TDS6000TCA-BNC Adapter required
TDS7000TCA-BNC Adapter required
THS3000Requires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TPS2000Requires 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
- - DC - 100 MHz -
-
Configure & Quote
TCP0020
View Compatible Instruments
5 Series MSOFully Compatible
5 Series MSO Low ProfileFully Compatible
DPO/DSA/MSO70000TCA-VPI50 Adapter required
DPO7000CFully compatible
MDO3000Fully compatible but probe not supported on RF Input
MDO4000CFully compatible but probe not supported on RF Input
MSO/DPO2000TekVPI® External Power Supply (119-8726-xx) required
MSO/DPO2000BTekVPI® External Power Supply (119-8726-xx) required
MSO/DPO3000Fully compatible
MSO/DPO4000Fully compatible
MSO/DPO5000Fully compatible
MSO/DPO5000BFully compatible
MSO4000BFully compatible
TBS2000Fully compatible

 

DC: 20 A
Max RMS: 20 A
Peak Current: 100 A

10 mA 50 MHz

< 7 ns

-
Configure & Quote
TCP303
View Compatible Instruments
DPO/DSA/MSO70000TCA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
DPO7000CTPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MDO3000TPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MDO4000CTPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO/DPO2000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
MSO/DPO2000BTCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
MSO/DPO3000TPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO/DPO4000TPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO/DPO5000TPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO/DPO5000BTPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
MSO4000BTPA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
TBS1000/TBS1000B/TBS1000B-EDUTCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TBS2000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TDS2000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TDS3000TCPA300 Amplifier with TekProbe Interface cable
TDS5000Requires TCPA300 Amplifier with TekProbe Interface cable
TDS6000TCA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
TDS7000TCA-BNC Adapter and TCPA300 Amplifier with TekProbe Interface cable
THS3000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TPS2000TCPA300 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable

DC: 150 A
Max RMS: 150 A
Peak Current: 500 A

5 mA

15 MHz

< 23 ns

-
Configure & Quote
TCP0030A
View Compatible Instruments
5 Series MSOFully Compatible
5 Series MSO Low ProfileFully Compatible
DPO/DSA/MSO70000TCA-VPI50 Adapter required
DPO7000CFully compatible
MDO3000Fully compatible but probe not supported on RF Input
MDO4000CFully compatible but probe not supported on RF Input
MSO/DPO2000TekVPI® External Power Supply (119-8726-xx) required
MSO/DPO2000BTekVPI® External Power Supply (119-8726-xx) required
MSO/DPO3000Fully compatible
MSO/DPO4000Fully compatible
MSO/DPO5000Fully compatible
MSO/DPO5000BFully compatible
MSO4000BFully compatible
TBS2000Fully compatible

 

DC: 30 A
Max RMS: 30 A
Peak Current: 50 A

1 mA

120 MHz

< 2.92 ns

-
Configure & Quote
TCP404XL
View Compatible Instruments
DPO/DSA/MSO70000TCA-BNC Adapter and TCPA400 Amplifier with TekProbe Interface cable
DPO7000CTPA-BNC Adapter and TCPA400 Amplifier with TekProbe Interface cable
MDO3000TPA-BNC Adapter and TCPA400 Amplifier with TekProbe Interface cable
MDO4000CTPA-BNC Adapter and TCPA400 Amplifier with TekProbe Interface cable
MSO/DPO2000TCPA400 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
MSO/DPO2000BTCPA400 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
MSO/DPO3000TPA-BNC Adapter and TCPA400 Amplifier with TekProbe Interface cable
MSO/DPO4000TPA-BNC Adapter and TCPA400 Amplifier with TekProbe Interface cable
MSO/DPO5000TPA-BNC Adapter and TCPA400 Amplifier with TekProbe Interface cable
MSO/DPO5000BTPA-BNC Adapter and TCPA400 Amplifier with TekProbe Interface cable
MSO4000BTPA-BNC Adapter and TCPA400 Amplifier with TekProbe Interface cable
TBS1000/TBS1000B/TBS1000B-EDUTCPA400 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TBS2000TCPA400 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TDS2000TCPA400 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TDS3000TCPA400 Amplifier with TekProbe Interface cable
TDS5000Requires TCPA400 Amplifier with TekProbe Interface cable
TDS6000TCA-BNC Adapter and TCPA400 Amplifier with TekProbe Interface cable
TDS7000TCA-BNC Adapter and TCPA400 Amplifier with TekProbe Interface cable
THS3000TCPA400 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable
TPS2000TCPA400 Amplifier and 50 Ohm feed through termination (part #011-0049-0X) between the scope input and the BNC cable

DC: 500 A
Max RMS: 500 A
Peak Current: 750 A

1 A

2 MHz

< 175 ns

-
Configure & Quote
TCP0150
View Compatible Instruments
5 Series MSOFully Compatible
5 Series MSO Low ProfileFully Compatible
DPO/DSA/MSO70000TCA-VPI50 Adapter required
DPO7000CFully compatible
MDO3000Fully compatible but probe not supported on RF Input
MDO4000CFully compatible but probe not supported on RF Input
MSO/DPO2000TekVPI® External Power Supply (119-8726-xx) required
MSO/DPO2000BTekVPI® External Power Supply (119-8726-xx) required
MSO/DPO3000Fully compatible
MSO/DPO4000Fully compatible
MSO/DPO5000Fully compatible
MSO/DPO5000BFully compatible
MSO4000BFully compatible
TBS2000Fully compatible

 

DC: 150 A
Max RMS: 150 A
Peak Current: 500 A

5 mA

20 MHz

< 17.5 ns

-
Configure & Quote
Model A621
Maximum CurrentMinimum CurrentBandwidth

RMS: 1000 A
Peak: 2000 A

10 mA

50 kHz

Model A622
Maximum CurrentMinimum CurrentBandwidth

DC: 100 A
Max RMS: 71 A
Peak Current: 100 A

50 mA

100 kHz

Model CT2
Maximum CurrentMinimum CurrentBandwidth

Peak: 36 A 
Max RMS: 2.5 A continuous

1 mA

200 MHz

Rise Time

< 500 ps

Model CT1
Maximum CurrentMinimum CurrentBandwidth

Peak: 12 A 
Max RMS: 450 mA continuous

200 μA

1 GHz

Rise Time

< 350 ps

Model CT6
Maximum CurrentMinimum CurrentBandwidth

Peak: 6 A 
Max RMS: 120 mA continuous

200 μA

2 GHz

Rise Time

< 200 ps

Model TRCP0300
Maximum CurrentMinimum CurrentBandwidth

300 A

250 mA

30 MHz

Model P6021A
Maximum CurrentMinimum CurrentBandwidth

Max RMS: 10.6 A
Peak Current: 250 A

10 mA

60 MHz

Rise Time

< 5.8 ns

Model TCP305A
Maximum CurrentMinimum CurrentBandwidth

DC: 50 A
Max RMS: 35.4 A
Peak Current: 50 A

5 mA

50 MHz

Rise Time

< 7 ns

Model TRCP3000
Maximum CurrentMinimum CurrentBandwidth

3000 A

500 mA

16 MHz

Model TRCP0600
Maximum CurrentMinimum CurrentBandwidth

600 A

500 mA

30 MHz

Model P6022
Maximum CurrentMinimum CurrentBandwidth

Max RMS: 4 A
Peak Current: 100 A

1 mA

120 MHz

Rise Time

< 2.9 ns

Model TCP312A
Maximum CurrentMinimum CurrentBandwidth

DC: 30 A
Max RMS: 21.2 A
Peak Current: 50 A

1 mA

100 MHz

Rise Time

< 3.5 ns

Model TCP202A
Maximum CurrentMinimum CurrentBandwidth

DC: 15 A
Max RMS: 15 A
Peak Current: 50 A

10 mA50 MHz
Rise Time

< 7 ns

Model TCPA400
Maximum CurrentBandwidth

(Probe Dependent)

100 MHz

Model TCP2020
Maximum CurrentMinimum CurrentBandwidth
20 A RMS, 100 A Peak Pulse10 mA50 MHz
Rise Time
≤7 ns
Model TCPA300
Bandwidth
DC - 100 MHz
Model TCP0020
Maximum CurrentMinimum CurrentBandwidth

DC: 20 A
Max RMS: 20 A
Peak Current: 100 A

10 mA50 MHz
Rise Time

< 7 ns

Model TCP303
Maximum CurrentMinimum CurrentBandwidth

DC: 150 A
Max RMS: 150 A
Peak Current: 500 A

5 mA

15 MHz

Rise Time

< 23 ns

Model TCP0030A
Maximum CurrentMinimum CurrentBandwidth

DC: 30 A
Max RMS: 30 A
Peak Current: 50 A

1 mA

120 MHz

Rise Time

< 2.92 ns

Model TCP404XL
Maximum CurrentMinimum CurrentBandwidth

DC: 500 A
Max RMS: 500 A
Peak Current: 750 A

1 A

2 MHz

Rise Time

< 175 ns

Model TCP0150
Maximum CurrentMinimum CurrentBandwidth

DC: 150 A
Max RMS: 150 A
Peak Current: 500 A

5 mA

20 MHz

Rise Time

< 17.5 ns

TCPA300/400 & TCP300/400 Series
This manual contains user information and specifications for the probes.
Part number: 077118300
Primary User
TCPA300/400 & TCP300A/400 Series
This manual contains user information and specifications for the TCPA300/400 amplifiers and the TCP305A, TCP312A, TCP303 and TCP404XL probes.
Part number: 077118301
Primary User
TCP202 Reference

Part number: 070954303
Combined User/Service
TCP300 and TCP400 Series Instructions
This sheet provides a brief introduction to the probes. These probes must be used with amplifiers; complete operating information can be found in the TCPA300/400 Amplifiers User Manual, Tektronix part number 077-1183-xx.
Part number: 071118501
User
TCPA300/400 and TCP300/400 Series
This manual contains service information for the probe.
Part number: 077032300
Service
TCPA300/400, TCP300/400 Instruction Manual

Part number: 071118400
Service
067-1686-00
This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
Part number: 071187202
Primary User
P6021
This document provides information for technicians to maintain or service a product. Information is given to the module level, and may include product care and cleaning tips, troubleshooting information, adjustments, and how to replace parts.
Part number: 070094707
Service
TCP0030
This document contains information that supports basic instrument operation as well as how to service to the module level.
Part number: 071181200
Primary User
067-1478-00 Power Measurements Deskew Fixture
This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
Part number: 071117501
Primary User
P6021 60 MHz Current Probe
This document contains information that supports basic instrument operation as well as how to service to the module level.
Part number: 070094706
Primary User
TCPA300/400 & TCP300/400 Series
This document contains information that supports basic instrument operation as well as how to service to the module level.
Part number: 071118303
Primary User
TCP0150
This document contains information that supports basic instrument operation as well as how to service to the module level.
Part number: 071225100
Primary User
TCP202
This manual includes instructions for using and servicing the probe.
Part number: 070954203
Primary User
TCPA300/400 & TCP300A/400 Series
This manual contains service information for the TCPA300/400 amplifiers and the TCP305A, TCP312A, TCP303 and TCP404XL probes.
Part number: 077032301
Service
TCP202 Reference
This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting.
Part number: 070954302
User
TCP202 Instruction Manual
This document contains information that supports basic instrument operation as well as how to service to the module level.
Part number: 070954202
Combined User/Service
P6022 Instruction Manual
This document contains information that supports basic instrument operation as well as how to service to the module level.
Part number: 070094803
Combined User/Service
CT-6 High Frequency AC Current Probe
This document contains information that supports basic instrument operation as well as how to service to the module level.
Part number: 071045300
Primary User
P6022
This manual describes procedures for using and servicing the probe.
Part number: 070094805
Primary User
CT-1 and CT-2
This document contains instrument operation, specification, and replaceable parts information.
Part number: 070795702
Primary User
Ensuring the Performance and Conformance of In-Vehicle Networks for New-Generation Automobiles
When comparing past, present and future automobiles, one trend is clear: cars have become data centers on wheels. Within each vehicle, the volume of data from safety systems, onboard sensors, navigation systems, and so on—and the reliance on that data—…
Literature number: 48W-61611-0
Primer 17 Oct 2019
Tektronix Probe Selection Guide
Tektronix probes ensure the highest signal fidelity possible from your device-under-test to your oscilloscope. With over 100 probe choices available, all perfectly matched to our industry-leading oscilloscopes, you can find the probe you need for your…
Literature number: 60W_14232_10
Product Selector Guide 11 Sep 2019
ABCs of Probes Primer

Literature number: 60Z-6053-14
Primer 11 Sep 2019
TCPA300/400 and TCP303/305A/312A/404XL Amplifiers and Current Probes Compliance and Safety
This manual contains compliance, safety, and installation information for the TCPA300/400 amplifiers and the TCP305A, TCP312A, TCP303 and TCP404XL current probes.
Part number: 071364301
User
The Probe
Measurement Accuracy Begins at the TipThis easy-to-print, 11x17 poster provides probe tips and techniques to post in your lab or workspace.
Literature number: 3GW-24992-3
Poster 08 Aug 2019
Which probes are compatible with oscilloscopes with the TekVPI probe interface?
There are a couple different types of TekVPI interfaces, one with a notch and one without. The notch was implemented later and was put in place because the front end was designed differently and communicates uniquely with those types of probes. …
FAQ ID: 56226 08 Aug 2019
30 A AC/DC Current Probe
TCP0030A Datasheet TCP0030A is a high-performance, easy-to-use AC/DC current probe designed for use and direct connection to oscilloscopes with the TekVPI™ probe interface. This AC/DC current measurement probe provides greater than 120 MHz of bandwidth with selectable 5 A a…
Literature number: 51W-19042-10
Datasheet
What are some of the benefits of the TekVPI probe interface?
The biggest benefits of the TekVPI™ probe interface are versatility and ease of use. Oscilloscopes with TekVPI interface support a wide range of probes including TekVPI probes, BNC and TekProbe-BNC Level 1 probes, and TekProbe-BNC Level 2 probes (via a…
FAQ ID: 56016 05 Aug 2019
TRCP0300, TRCP0600, and TRCP3000 Current Probes
The TRCP series of Rogowski Current Probes from Tektronix combines high bandwidth performance with minimal disruption to the circuit under test. Use these instructions to help you obtain the best and safest performance from your product.
Part number: 077121300
Primary User
Making Accurate Current Measurements on Power Supplies with Oscilloscopes
Learn how to measure current using shunt resistors and voltage probes, and how to use clamp-on current probes with your oscilloscope. Get tips on improving the resolution of your current measurements and avoiding common pitfalls.
Literature number: 51W-60171-2
Application Note 30 Jul 2019
AC/DC Current Measurement Systems
TCPA300, TCP312A, TCP305A, TCP303, TCPA400, TCP404XL Datasheet The TCP300 and TCP400 Series AC/DC current measurement family is a highly advanced current measurement system for today's current measurement needs. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect (w/ TCA-BNC), or TekVPI (w/ T…
Literature number: 60W-16458-12
Datasheet
What are the maximum power draw ratings for the DPO3000/MSO3000 TEKVPI probes?
The MSO/DPO3000 Series scope can handle up to 20 Watts of attached probes. With an external adapter (Part #119-7465-xx) these scopes can reach up to 50 wattage requirement depending on probe requirements. Please see the download link below with a full…
FAQ ID: 61131 18 Jul 2019
Probes and Accessories Declassification and Security
This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair.
Part number: 071238400
Declassification
AC Current Probes
P6021A & P6022 The P6021 and P6022 Current Probes provide versatile AC current measurements. Both probes provide accurate current measurements over a wide range of frequencies. The P6021 and P6022 allow current measurements without breaking the circuit by clipping onto…
Literature number: 60W-06647-4
Datasheet
TCP0150 AC/DC Current Probe, Datasheet
TCP0150 DatasheetTCP0150 is a high performance and easy-to-use 150 A AC/DC current probe designed for use and direct connection to the TekVPI™ probe interface. This AC/DC current measurement probe provides 20 MHz of frequency bandwidth with selectable range control for 25…
Literature number: 51W-20815-5
Datasheet
TCPA300/400 & TCP300/400 Series Revision A: Amplifiers & AC/DC Current Probes
Revision A: This manual contains user information and specifications for the probes.
Part number: 077118300
Primary User
TCPA300/400 & TCP300A/400 Series Amplifiers & AC/DC Current Probes
Revision A: This manual contains user information and specifications for the TCPA300/400 amplifiers and the TCP305A, TCP312A, TCP303 and TCP404XL probes.
Part number: 077118301
Primary User
AC Current Probes Datasheet
CT1 • CT2 • CT6The CT6 provides up to 2 GHz bandwidth when used with high-bandwidth oscilloscopes such as the Tektronix TDS694C, TDS794D, and TDS7000 Series oscilloscopes or with other compatible 50 Ω input measuring instruments. Low inductance (
Literature number: 60W-12572-4
Datasheet
TRCP0300, TRCP0600, TRCP3000 power supply
Tektronix does not offer a replacement part number. The power supply an External Desktop AC to DC supply.  12V 1.6A with a barrel connector of 2.1mm ID and 5.5mm OD. ​  Positive (+) inside; necitive (-) outside.
FAQ ID: 772586 04 Mar 2019
AM503+ AM503A+ AM503B+ AM503S+ AM5030+ AM5030S Memory Information and Clearing Memory Clearing Procedure Declassification
Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top